Skip to content
Abierto

Combined synopsis and solicitation, total small business set-aside

Ventilated Enclosure/Paint Booth

W911SG24Q0074

Department of the Army, W6QM Micc-Ft Bliss. Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing.

Awarded

Tech Service Solutions LLC

$0.00 obligated so far on USAspending

Description

As published on SAM.gov.

Product Description AIR FILTRATION SYSTEM REQUIREMENTS (VENTILATED ENCLOSURE/PAINT BOOTH) Many ventilation systems exist and could potentially be used to control the Cr(VI) hazard during aviation maintenance processes. Selection should be done in collaboration with Industrial Hygiene and Safety professionals to ensure the ventilation system meets minimum design criteria.

Defense Centers for Public Health-Aberdeen recommends the following minimum design criteria: • American Conference of Governmental Hygienists (ACGIH)® Industrial Ventilation Manual Figure VS-75-01 Large Paint Booth: Minimum cross-sectional velocity of 100 feet per minute (fpm) for a large deep booth with a cross-sectional area greater than 150 square feet (ft2).

Airless electrostatic and high velocity low pressure spray paint operations require an air velocity of 100 fpm. • ACGIH® Industrial Ventilation Manual Figure VS-80-01 Abrasive Blasting Room: Cross-sectional minimum velocity of 100 fpm. • American National Standards Institute/American Society of Safety Professionals (ANSI/ASSP)

Z9.4-201 I (R2021): Requires a cross-sectional velocity of 100 fpm. Exhaust System - 18,000 Cubic Feet per Minute or higher to achieve ACGIH recommended TLVs - Must verify accurate testing and sampling data that system will provide clean air below the ACGIH TLVs of 0.0002mg/m3 - Multi-stage Particulate filtration exceeds the National Emission Standards for Hazardous Air Pollutants (NESHAP) 319 to ensure Soldiers working outside of the enclosure are not exposed to hexavalent chromium levels in excess of .0002mg/m3.

Enclosure - Enclosure must be Cross Draft Negative - Material NFPA 701 Compliant - Recommend size: 10’H X 18’W X 45”L (based on hangar size and unit requirements) Fire Suppression - Dry Chemical to protect both the enclosure and exhaust - Pre-engineered meeting NFPA 17 Standard for Dry Chemical extinguishing Replacement Filters - 18 Month Supply Lighting - Eight (8) Lights: 10,000 lumens per light Warranty - 5-year warranty

The contract, on USAspending

Federal procurement data the awarding office reported to FPDS, matched to this solicitation by its number.

UEI
UKZDZ3TPMLU1
CAGE
91QC4
Vendor location
Phoenix, AZ
Contract
W911SG24P0094, purchase order
Obligated
$0.00
Actions
2 between July 22, 2024 and August 2, 2024
Competition
Competed Under SAP, 6 offers received
Set-aside reported
Small Business Set Aside - Total
Described as
Ventialted Paint System
Match
solicitation number W911SG24Q0074 equals the FPDS solicitation identifier; same awarding office W911SG (high confidence)
Recipient
Arhab LLC
UEI
SKN6ZCV2L174
CAGE
9UVS7
Vendor location
Stratford, CT
Contract
W911SG24P0099, purchase order
Obligated
$181,765.00
Actions
1 between August 9, 2024 and August 9, 2024
Competition
Competed Under SAP, 6 offers received
Set-aside reported
Small Business Set Aside - Total
Described as
Ventilated Paint System
Match
solicitation number W911SG24Q0074 equals the FPDS solicitation identifier; same awarding office W911SG (high confidence)

Publications

Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.

  1. June 14, 2024

    Combined synopsis and solicitation

    Due June 26, 2024 at 12:00 PM EDT. SAM.gov, notice 4fc805c6d24041ad8f832d4f566bf606

  2. June 20, 2024

    Combined synopsis and solicitation

    Due June 26, 2024 at 12:00 PM EDT. SAM.gov, notice 29be62cacaeb4da4a4c4df53493b7523

  3. June 25, 2024

    Combined synopsis and solicitation

    Due June 27, 2024 at 6:00 PM EDT. SAM.gov, notice 8b28d7513a0c45238e91b3f3c4d8a24f

  4. June 27, 2024

    Combined synopsis and solicitation

    Due June 28, 2024 at 6:00 PM EDT. SAM.gov, notice 673aa89120534057969ec94bda7bd642

  5. June 28, 2024

    Combined synopsis and solicitation

    Due July 8, 2024 at 6:00 PM EDT. SAM.gov, notice be2d5a9891274f63a56c2a4a6075a5d2

Points of contact