Solicitation, total small business set-aside
LLA CHECK VALVES
W912EF26QA083
Department of the Army, US Army Engineer District Walla Wal. Industrial Valve Manufacturing.
Response deadline
August 19, 2026 at 5:00 PM EDT
Closed 74 days ago. Posted August 14, 2026, first published July 27, 2026. Scheduled to archive September 3, 2026.
Get the next one like this from Department of the Army by email, the day it is posted.Find my opportunities
This one closed in 2026
145 like it are open now in industrial valve manufacturing
- 3-Way Control Valve and Controls for the U.S. Dredge Wheeler
Department of the Army, W07V Endist New Orleans
Combined synopsis and solicitationSmall businessNAICS 332911Anywhere in the USW912P826QA039Closes tomorrowNov 2 - VALVE,GATE
Defense Logistics Agency, DLA Weapons Support
Combined synopsis and solicitationSmall businessNAICS 332911Anywhere in the USSPE7MC27T1039Closes in 2 daysNov 2 - VALVE,SOLENOID
Defense Logistics Agency, DLA Weapons Support
Combined synopsis and solicitationNAICS 332911Anywhere in the USSPE7MC27T1010Closes in 2 daysNov 2
Description
As published on SAM.gov.
This is a solicitation for commercial products, as supplemented with additional information included in this notice. The U.S. Government requires the purchase and delivery of two (2) new, 18-inch Carbon Steel Globe Body Silent Check Valves to Lower Granite Dam. Quotes must be submitted on a firm-fixed-price basis for new equipment only; remanufactured, refurbished, or "gray market" items will not be accepted. The supplied valves must be designed to prevent flow reversal, surge, and water hammer, complying with all applicable ASTM codes and standards.
Technical requirements include a Cast Carbon Steel body (ASTM A216 Grade WCB), 316 Stainless Steel trim/disc (ASTM A351 Grade CF8M), a 302 Stainless Steel spring (ASTM A276), and stainless steel guide pins and bushings. Operational parameters dictate a minimum pressure/temperature rating of 285 PSI at 100°F, ANSI Class 150 integrally cast flanged ends with a 16-hole bolt pattern, a flow capacity of at least 110% of the equivalent pipe size, a cracking pressure of less than 1 PSI, and top-and-bottom guided disc alignment for multi-angle installation. Furthermore, the valves must feature a metal-to-metal hand-lapped drop-tight seal and a permanent corrosion-resistant stainless steel nameplate detailing the manufacturer, model, size, rating, and manufacturing date. Due to strict installation constraints, the following physical dimensions are mandatory with no exceptions allowed: a face-to-face measurement of exactly 22.5 inches, an overall diameter not exceeding 31 inches, a valve weight not exceeding 1,300 lbs, and Class 150 flanges meeting ASTM A105 and ASME B16.5 standards (25-inch outside diameter, 22.75-inch bolt circle diameter, and a 16-hole configuration).
UPDATED: Solicitation Amendment 0001 - "The purpose of this amendment is to extend the solicitation offer due date from August 13, 2026 at 5PM PDT to August 19, 2026 at 2PM PDT to allow additional time to address technical questions submitted through ProjNet. All other terms and conditions remain unchanged."
Attachments
Files listed on SAM.gov. The ones we hold a copy of download from here; the rest open SAM's download, which needs no account.
- Solicitation - W912EF26QA083 Released.pdf3.2 MB, July 27, 2026
Publications
Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.
July 27, 2026
Solicitation
Due August 13, 2026 at 8:00 PM EDT. SAM.gov, notice 08f130546e8f4efdafd821cb6a837585
2 revisions on SAM
- August 14, 2026: publish, solicitation
- July 27, 2026: publish, solicitation
August 14, 2026
Solicitation
Due August 19, 2026 at 5:00 PM EDT. SAM.gov, notice 0817fecb84f3471496bfb3263052788d
3 revisions on SAM
- August 26, 2026: publish, award notice
- August 14, 2026: publish, solicitation
- July 27, 2026: publish, solicitation
Points of contact
- Gregory MoyerGregory.Moyer@usace.army.mil5095277207
- Kristin Hydekristin.a.hernandez@usace.army.mil