Solicitation
Epoxy Service for Garage Floor at STA Philadelphia
30368QR250000005
US Coast Guard, Base Portsmouth. Flooring Contractors.
Response deadline
July 25, 2025 at 3:00 PM EDT
Closed 464 days ago. Posted July 18, 2025. Scheduled to archive July 26, 2025.
Get the next one like this from US Coast Guard by email, the day it is posted.Find my opportunities
This one closed in 2025
9 like it are open now in flooring contractors
- Replace Operating Room 5 Flooring
Department of Veterans Affairs, Network Contract Office 23
SolicitationSDVOSBNAICS 238330Des Moines, IA36C26327Q0019Closes in 2 daysNov 3 - Grout Maintenance for the Puget Sound VA
Department of Veterans Affairs, 260-Network Contract Office 20
SolicitationSmall businessNAICS 238330Washington36C26026Q0827Closes in 4 daysNov 5 - IDIQ Flooring
Department of the Army, W6QM Micc-Ft Stewart
Combined synopsis and solicitation8(a)NAICS 238330Anywhere in the USW9124M26BA004Closes in 11 daysNov 12
Description
As published on SAM.gov.
Scope of work Project: Station Philadelphia Boat Bay floor restoration/Epoxy Address:
1 Washington Ave. Philadelphia, PA 19147 Client: United States Coast Guard Project Overview This scope of work details the renewal of the station’s boat bay. Total boat bay square footage is approx. 1700sqft. The work includes grinding, filling, and laying new flake epoxy with a grit topcoat. Detailed overview. • If needed, utilize traffic cones and yellow tape to properly restrict access to the working areas. • Thoroughly clean the floor to remove any dirt, oil, grease, or other contaminants.
Use a degreaser if necessary. • Fill any cracks or holes with polyurea crack filler and allow it to cure. (if included in the above scope of work) • Using our commercial grade concrete grinders, grind to a surface profile of 2 to 3. This ensures proper adhesion of the coatings system. (1/16"depth) • Conduct a moisture & humidity check before application process begins. • Apply epoxy coating system to concrete floor, followed by a heavy broadcast flake of color.
Shave flakes and clean up all debris. • Apply topcoat of polyaspartic clear to all surface areas. • Once complete, perform final inspection and make any necessary touch ups before leaving the jobsite.
Publications
Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.
July 18, 2025
Solicitation
Due July 25, 2025 at 3:00 PM EDT. SAM.gov, notice 0b14d93afd3b47b09636b405cde8603a
Points of contact
- Alejandro VillarrealAlejandro.L.Villarreal@USCG.MIL2152714837
- Michael CooperMichael.T.Cooper@uscg.mil(440)554-6007