Skip to content
Abierto
Menu

Award notice, first published as combined synopsis and solicitation

Micro-/Macro- Hardness Tester

W912CH-24-R-L068

Department of the Army, W6QK Acc- Dta. Other Measuring and Controlling Device Manufacturing.

View on SAM.govMarkdown

Awarded

Innovatest USA Co

$102,179.00 obligated so far on USAspending

Description

As published on SAM.gov with the combined synopsis and solicitation of August 26, 2024.

STATEMENT OF WORK C.1. Purpose and Scope. The Ground Vehicle Systems Center (GVSC), Ground Vehicle Materials Engineering’s Materials Testing Lab requires procurement of a Micro-/Macro- Hardness Tester. C.2. Scope of Effort. The vendor will provide a Micro-/Macro- Hardness Tester with the following scope associated with this statement of work the following scope of C.2.1. Load Range. C.2.1.1. The load range shall be from 0.3 kg to 3,000 kg. C.2.2. Testing Capabilities. C.2.2.1.

The equipment shall conduct tests according to ASTM standards for the following scales: C.2.2.1.1. Vickers (HV 10, 20, 30, 50, 100) C.2.2.1.2. Knoop C.2.2.1.3. Brinell (10/3000) C.2.2.1.4. Rockwell (A, B, C) C.2.3. Testing Modes. C.2.3.1. The tester shall perform both clamped and unclamped testing. C.2.4. Software. C.2.4.1. The preloaded software shall enable automatic test sequences for gears, Jominy, and welded joints. C.2.4.2. The computer will be a standalone unit, not be on the DREN or NIPR network, C.2.5.

Control Interface. C.2.5.1. The equipment shall be controllable via a touch display or PC. C.2.6. Automation. C.2.6.1. The tester shall support semi-automatic and fully automated testing for Vickers, Knoop, Brinell, and Rockwell. C.2.7. Camera Specifications. C.2.7.1. The evaluation camera shall have a minimum resolution of 12 MP and feature a CMOS sensor. C.2.8. Test Table Specifications. C.2.8.1. The test table shall support a load of at least 50 kg. C.2.8.2. The maximum test height shall be at least 380 mm.

C.2.8.3. The dimensions shall be at least 435 mm (width) x 215 mm (depth). C.2.9. Tool Cabinet/Base. C.2.9.1. The tester shall be supplied with a compatible tool cabinet/base for equipment storage. C.2.10. Calibration. C.2.10.1. The equipment shall be calibrated to ASTM standards for Vickers, Knoop, Brinell, and Rockwell. C.2.10.2. Calibration shall be performed upon completion of equipment installation and setup. C.3. Deliverables. C.3.1. All items stated in the Scope of Work shall be delivered to:

U.S. Army Tank-Automotive and Armaments Command 6501 E. 11 Mile Road, Building 200-E, Mailstop 234, Metallurgy Laboratory Warren, Michigan 48397-5000

The contract, on USAspending

Federal procurement data the awarding office reported to FPDS, matched to this solicitation by its number.

Recipient
Innovatest USA Co
UEI
XUNLPAK21ZU6
CAGE
975N2
Vendor location
Horsham, PA
Contract
W912CH24PL023, purchase order
Obligated
$102,179.00
Actions
1 between September 24, 2024 and September 24, 2024
Competition
Competed Under SAP, 3 offers received
Set-aside reported
No Set Aside Used.
Described as
Micro-/Macro- Hardness Tester
Match
solicitation number W912CH24RL068 equals the FPDS solicitation identifier; same awarding office W912CH (high confidence)
Record
USAspending award page

Publications

Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.

  1. August 26, 2024

    Combined synopsis and solicitation

    Due September 13, 2024 at 1:00 PM EDT. SAM.gov, notice d95eebf53af341048d67d9b95b91b70e

  2. October 3, 2024

    Award notice, originally combined synopsis and solicitation

    Awarded to Innovatest USA company Horsham for $102,179. SAM.gov, notice 7b15af0aaa6644298691978d281339a3

Points of contact

Also open from this buyer