Saw

Amendment to correct quantity of connecting rollers and extra blades. Amended to include set aside code.

Horizontal Band Saw: PERFORMANCE/ CAPACITY ?

Cycle Type: Semi-Automatic (Must support programmable cycle functions).;

Miter Capability: Minimum of 60? Left and 60? Right Dual Swivel Head.; Cutting Capacity at 90?

(Round): Minimum 11.75 in. (298.45 mm) diameter.; Cutting Capacity at 90?

(Rectangle): Minimum 14 in. x 19 in. (355.6 mm x 482.6 mm).; Cutting Capacity at 45?

(Round): Minimum 14 in. (355.6 mm) diameter.; Cutting Capacity at 60?

(Round): Minimum 11.75 in. (298.45 mm) diameter.; Cutting Capacity at 60?

(Rectangle): Minimum 11.75 in. x 8.5 in. (298.45 mm x 215.9 mm).;

Band Speed: Infinitely variable speed range that includes 65 to 328 feet per minute (19.8 to 100 meters per minute), controlled by variable frequency drive.;

Band Drive Motor: Minimum 4 HP (3.0 kW). SYSTEMS/ FEATURES ?

Coolant Systems: Both a Flood Coolant System and a separate Mist Lubricator System.;

Coolant System Motor: Minimum 0.5 HP (0.373 kW).;

Coolant Reservoir: Minimum 5 gallons (18.9 liters).;

Vise Type: Full Stroke Hydraulic.;

Vise Pressure Control: Variable Vise Pressure Control.;

Hydraulic System Motor: Minimum 0.5 HP (0.373 kW).;

Hydraulic Reservoir: Minimum 3 gallons (11.4 liters).;

Control Console: Movable/ Repositionable Control Console.;

Head Feed Control: Rapid Head Down Approach and Fine Adjustment Head Feed Control.;

Saw Head Design: Canted or Sloped saw head (e.g., 2-degree cant).;

Saw Guides: Must utilize Carbide-Faced Saw Guides.;

Band Tension System: Manual or Hydraulic system with visible tension indicator.;

Band Cleaning System: Equipped with motor-driven cleaning brush.;

Angle Positioning: Both a Spring-Loaded Detents and a Digitally Displayed Angle Position.;

Height Sensor: Programmable Material Height Sensor.;

Construction: Built with Heavy-Duty Counterbalance Springs and Cast Steel Band Wheels.;

Safety Features: Includes Saw Blade Guards and Band Door Interlocks.; ELECTRICAL ?

Main Power: 230V or 460V (+/- 10%), 60 Hz, 3-Phase, Wye configured power.;

Full Load Amp Draw: Maximum 14A at 230V and Maximum 7A at 460V.; CONSTRUCTION/ DIMENSIONS ?

Blade Width: Minimum 1.25 in. (32 mm), 34 mm industry standard acceptable.;

Blade Length: Accommodates length range of 185 in. to 190 in. (4699 mm to 4826 mm).;

Material Pass Line Height: Range of 31 in. to 33 in. (787.4 mm to 838.2 mm) from the floor.; WARRANTY/ ACCESSORIES ?

Warranty: Minimum 10-year Manufacturers Warranty on parts.;

Input and Output Conveyors: One (1) 5 ft (1.524 m) idler conveyor and one (1) 10 ft (3.048 m) idler conveyor.;

Connecting Rollers: One (1) 360-RDL+TAL connecting rollers for the left side and one (1) 360-RDR+TAL connecting rollers for the right side suitable for angle cutting at a Minimum length of 3.3 ft (1000 mm), Minimum width of 20 in. (508 mm), and Minimum load capacity of 572 lbs/ft (851 kg/m), Extra Blades: Six (6) pack.; DOCUMENTATION ?

Manuals: Operation and Parts Manuals.;

Chart: Recommended Band Speed Chart.; ADDITIONAL REQUIREMENTS ?

Spec Drawings: Available upon purchase.;

Condition: Must be new (refurbished, rebuilt, or used units will not be acceptable).;

Lead Time: No later than 3 weeks ARO (after receipt of order).;

Delivery: Tooele Army Depot, Utah.