Combined synopsis and solicitation, total small business set-aside
LIST OF STAINLESS STEEL CLAMP TOGETHER DUCT PARTS
W911S225U1606
Department of the Army, W6QM Micc-Ft Drum. Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing.
Response deadline
August 22, 2025 at 12:00 PM EDT
Closed 437 days ago. Posted August 18, 2025, first published August 15, 2025. Scheduled to archive August 18, 2026.
Get the next one like this from Department of the Army by email, the day it is posted.Find my opportunities
This one closed in 2025
36 like it are open now in industrial and commercial fan and blower and air purification equipment manufacturing
- Sources Sought, Vaneaxial Fan Assembly, NSN: 4140-01-284-5722
Department of the Army, W6QK Acc- Dta
Sources soughtNAICS 333413Anywhere in the USW912CH-27-R-A025Closes todayNov 2 - FAN,VANEAXIAL
Defense Logistics Agency, DLA Troop Support
Combined synopsis and solicitationSmall businessNAICS 333413Anywhere in the USSPE8E727T0241Closes tomorrowNov 2 - IMPELLER,FAN,CENTRIFUG
Defense Logistics Agency, DLA Aviation
Combined synopsis and solicitationNAICS 333413Anywhere in the USSPE4A527T1824Closes tomorrowNov 2
All 36 open in industrial and commercial fan and blower and air purification equipment manufacturing
Description
As published on SAM.gov.
Implemented Amendment to change PSC code from F101 to 4140. In need of a list of stainless steel duct parts equivalent to KB Duct. The parts are listed below with KB Duct part numbers. The clamps are forever clamps giving a compression seal to prevent leakage using a concave design and a buna gasket and made of 309 grade stainless steel. The ducting below is made of 304 grade stainless steel having rolled lips on each end to be clamped together.
The sleeves are made of 304 stainless steel and are used to make up lengths needed on runs. The sleeve slides over the outside of the duct and with an o-ring is clamped to the duct.
The elbows, reducers, caps and transitions are all made of 304 grade stainless steel and the gauges of the metal are given with each item needing that information.2 each 16 inch DIA END CAP, ROLLED LIP CONNECTION, STANDARD CLOSED END WITH HANDLE, Pn 19516SS 18 GA 1 each 16 inch DIA SR 45 DEG CLAMPED TOGETHER STAINLESS GORED ELBOW, Pn 12016.45SS 18 GA 4 each 16 inch DIA SR 90 DEG CLAMPED TOGETHER STAINLESS GORED ELBOW, Pn 12016.90SS 18 GA 4 each 16 INCH DIA X 11 INCH STANDARD ADJUSTABLE STAINLESS SLEEVE, Pn 11016SS 18 GA 33 each 16 inch DIA CLAMP TOGETHER STAINLESS DUCT, 5 foot SECTIONS, Pn 10016SS 18 GA 50 each 16 INCH DIA KB DUCT FOREVER CLAMP WITH BUNA-N SEALS, Pn 13016 1 each 16 INCH DIA X 12 INCH DIA CLAMP TOGETHER REDUCER WITH 12 inch DIA 45 DEG Pn 14016.45SS 16KB-12KB-12KB 2 each 12 INCH DIA SR 45 DEG CLAMPED TOGETHER STAINLESS GORED ELBOW, Pn 12312.45SS 22 GA 2 each 12 INCH DIA X 11 INCH STANDARD ADJUSTABLE STAINLESS SLEEVE, Pn 11012SS 22 GA 2 each 12 inch DIA CLAMP TOGETHER STAINLESS DUCT, 5 foot SECTIONS, Pn 10012SS 22 GA 10 each 12 inch DIA KB DUCT FOREVER CLAMP WITH BUNA-N SEALS, Pn 13012 1 each 16 inch TRANSITION 18 GA 304 SS 18x18 SQUARE TO ROUND KB EXCEL SPREADSHEET OF PARTS LIST ATTACHED
Publications
Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.
Points of contact
- David Fortunedavid.c.fortune.civ@army.mil9184206445