Skip to content
Abierto

Solicitation, total small business set-aside

Fort Riley Heavy Crane Rental

W911RX-25-Q-0006

Department of the Army, W6QM Micc-Ft Riley. Overhead Traveling Crane, Hoist, and Monorail System Manufacturing.

Awarded

Tech O. R., LLC

$49,672.00 obligated so far on USAspending

Description

As published on SAM.gov.

This is a total small business solicitation. All small businesses, regardless of socioeconomic category, are welcome to provide a RFQ in line with the required capabilities. The contractor shall provide operators, a rigging team, and one (1) Crane capable of hoisting an M1A2 Tank (73.59 tons) off of a rail car, and placing the Tank on the ground. Center of gravity for the radius is no closer than 24 feet and no farther than 38 feet.

The radius is due to stand-off distance from the crane’s stationary operating position to the tracks containing the railcars and broken equipment. The heaviest load is the M1A2 tank; it weighs 73.59 tons. The crane’s boom must be able to sustain lifting the tank and rotating the load in a radius of up to 38 feet away from the railcar. Rigging points are on the four corners of the tank, approximately 10-12 inches from the edge of the tank.

Minimal sling length should be 10-15 feet per leg with a central ring for hook attachment; weight capacity for the sling set shall be at least 80 tons. The sling set must also have large shackles to attach to the lifting points on the tank. Additionally, taglines will be needed to help steer/remain in control of the tank while in motion. Spreader bars are required in addition to the sling to prevent the cables from pressing into the tank turret and bending the bustle rack railing and platform.

The Crane will be used to download a variety of Non-Mission Capable (NMC, i.e., broken) equipment from the rail cars onto the ground at Camp Funston Rail Yard, Fort Riley. NMC equipment includes:

M1A2 Abrams Tank (73.59 tons), M1120A2 Truck (40,300 lbs.), M1074A1 Material Handling Crane w/ winch (55,204 lbs.), M88A2 Tracked Recovery Vehicle (70.8 tons), or the M2A3 Fighting Vehicle (74,400 lbs.). Transportability guidance excerpts have been provided for graphic references, weights, and measurements for vendor consideration of sling set and spreader bars. DTG is 15-18OCT - day breakdown is as follows:

15OCT24: Mobilize in, standby ready to lift NLT 1200 16OCT24: Lift (8 Hrs)

0800-1600 17OCT24: Lift (8 Hrs)

0800-1600 18OCT24: Lift (8 Hrs) 0800-1600 (May begin breakdown upon download completion after release by COR)

19OCT24: Mobilize out at contractor's convience. *Please see attached RFQ, PWS, and Crane Cargo Lift Information for specifics such as actual timeline (PWS) *Please included in your quote the size of the quoted crane (in tons) and the number/breakdown of quoted crew.

The contract, on USAspending

Federal procurement data the awarding office reported to FPDS, matched to this solicitation by its number.

UEI
RGM9WWRD4CJ4
CAGE
6WBR1
Vendor location
Dearborn, MI
Contract
W911RX25P0001, purchase order
Obligated
$49,672.00
Actions
2 between October 10, 2024 and October 18, 2024
Competition
Competed Under SAP, 10 offers received
Set-aside reported
Small Business Set Aside - Total
Described as
2abct Return Heavy Crane Rental
Match
solicitation number W911RX25Q0006 equals the FPDS solicitation identifier; same awarding office W911RX (high confidence)

Publications

Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.

  1. October 2, 2024

    Solicitation

    Due October 8, 2024 at 2:00 PM EDT. SAM.gov, notice 33d2e690775d4a4f9f45722adfb5f296

Points of contact