Skip to content
Abierto
Menu

Combined synopsis and solicitation

Intent to Solicit one source for one (1) pair of press platens to be manufactured and installed to replace damaged platens on a Collin Lab and Pilor Solutions GmbH manufactured Press 500 S equipment.

W911QX25Q0111

Department of the Army, W6QK ACC-APG Adelphi. All Other Industrial Machinery Manufacturing.

View on SAM.govMarkdown

Awarded

Next Generation Analytics Inc.

$95,940.00 obligated so far on USAspending

Description

As published on SAM.gov.

DEVCOM ARL requires a pair of press platens to replace damaged platens on the Collin Press 500 S equipment owned by Sciences of Extreme Materials Division, Polymers Branch. The following are required: Shall have one (1) pair (one upper and one lower) of press platens The platens shall be compatible with existing Collin Press 500 S equipment and shall have the ability to be directly installed.

The platens shall be compatible with the existing control system of the Collin Press 500 S, such that the onboard control system can control heating and cooling of the press platens. The platens shall be capable to withstand 2000N force on a 7” x 7” mold, while using a 1” thick steel caul plate measuring 18” x 18” without damage or permanent deformation The platens shall be capable to withstand the above pressure conditions through repeated press cycles from room temperature up to 450oCelsius.

The upper and lower platens shall be capable of independent temperature control Shall include on-site installation, start up, and training after the parts have been installed.

The contract, on USAspending

Federal procurement data the awarding office reported to FPDS, matched to this solicitation by its number.

Recipient
Next Generation Analytics Inc.
UEI
WKJYR8ZMW785
CAGE
7GRT2
Vendor location
Tucker, GA
Contract
W911QX25PA119, purchase order
Obligated
$95,940.00
Actions
1 between September 13, 2025 and September 13, 2025
Competition
Not Competed Under SAP, 1 offer received
Set-aside reported
No Set Aside Used.
Described as
The Government Requires One (1) Pair of Press Platens to Be Manufactured and Installed to Replace Damaged Platens on a Collin Lab and Pilor Solutions GMBH Manufactured Press 500 S Equipment.
Match
solicitation number W911QX25Q0111 equals the FPDS solicitation identifier; same awarding office W911QX (high confidence)
Record
USAspending award page

Publications

Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.

  1. August 28, 2025

    Combined synopsis and solicitation

    Due September 5, 2025 at 11:59 AM EDT. SAM.gov, notice 0704d306f93542509565db65822efcde

Points of contact

Also open from this buyer