Mobile Gantry Crane

Amendmned to extedn due date on 17 Dec 25.

***********************

The 35th Contracting Squadron is seeking interested vendors able to source and deliver a Mobile Crane that meets or exceeds the below specificaitons. the requiremetn requires direct delivery to Misawa Airbase Japan.

Please see attached RFQ for additional details and requirements. 

MOBILE GANTRY CRANE REQUIREMENTS:

-CAPACITY: MIN OF 10 TON

-STEEL FRAMES AND STEEL I-BEAMS

-18” MAIN TROLLEY I-BEAM

-HEIGHT MAX: 19’ 5”

-HEIGHT MIN: 12’ 7”

-WIDTH: 15’ 8” MAX AT CASTERS X OVERALL 15’ 0” AT GANTRY TOP I-BEAM

-DEPTH: 7’ 10” MIN X 11’ 4” MAX,

-CLEARANCE: 18” BETWEEN LEGS UNDER I-BEAM AT MAX HEIGHT AND MAX SPREAD

-SELF-ALIGNING I-BEAMS

-SAFETY CABLE TO PREVENT OVER-SPREADING I-BEAMS WHILE BEING ADJUSTED

-PIN LOCKING CASTERS WITH 4-POSITION SWIVEL LOCKS

-10” DIA POLYURETHANE CASTERS - 8 EACH

-BRAKES ON THE CASTERS

-COMPATIBLE PUSH TROLLEY: HEADROOM OF 4.7" AND FLANGE WIDTH ADJUSTMENT OF 5.5" - 8.66" (ACTUAL 6")

-POWERED HOIST WITH WALL PLUG - 120v AC 60 Hz

-MINIMUM HOOK HEIGHT: 17' 1.5"

-MINIMUM LOAD CLEARANCE HEIGHT: 15' 0.5"

-MINIMUM PINCH POINT BETWEEN THE SUPPORT BEAMS: 10’

-VARIABLE SPEED

-MAXIMUM CREEP SPEED: 1.75' PER MINUTE

-HOOK MUST HAVE ABILITY TO REACH FLOOR