USCGC SEQUIOA FABRICATION OF JOINER DOORS

USCGC SEQUOIA (WLB 215) SPECIFICATION FOR Fabrication of Joiner Doors FY2024 Developed By: Bryan G. Wright (Rev-0, 25 April 2024) USCGC SEQUOIA (WLB-225) DRYDOCK AVAILABILITY FY2022 ii (Rev-0) TABLE OF CONTENTS Revisions Record......................................................................................................................................... iii Consolidated List of References...................................................................................................................iv WORK ITEM 1: Fabrication of Joiner Doors...............................................................................................5 USCGC HICKORY (WLB-225) DRYDOCK AVAILABILITY FY2022 iii (Rev-0) REVISIONS RECORD This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package.

Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK ITEM# CHANGES MADE NOTE: All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated. USCGC SEQUOIA (WLB-225) DRYDOCK AVAILABILITY FY2022 iv (Rev-0) CONSOLIDATED LIST OF REFERENCES The below-listed documents form a part of this specification to the extent specified herein.

Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution. All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website.

Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS Coast Guard Drawing 225-WLB-624-001, Rev H; Joiner Doors and Curtian Schedule COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures OTHER REFERENCES Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 5 (Rev-0)

WORK ITEM 1: Fabrication of Joiner Doors 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to fabricate 09 each and ship Joiner Doors identified in Table 1 in accordance with drawings and references. TABLE 1 - JOINER DOORS AND LOCATIONS ITEM DESCRIPTION NSN/PN 1-58-2 (31 x 72 Jnr Door) Steel A-60 RH AFT. See WLB-624-001 for description. 0162401A-29 1-59-2 (31 x 70 Jnr Door) Steel A-60 LH AFT. See WLB-624-001 for description. 0162401A-33 1-64-1 (25 x 72 Jnr Door) Steel A-0 RH OUTBD.

See WLB-624-001 for description. 0162401A-16 1-65-0 (31 x 70 Jnr Door) Steel A-60 RH AFT. See WLB-624-001 for description. 0162401A-37 1-67-1 (27 x 72 Jnr Door) Steel A-60 LH FWD. See WLB-624-001 for description. 0162401A-25 1-77-2 (27 x 76 1/2 Jnr Door) Steel B-0 RH FWD. See WLB-624-001 for description. 0162401A-21 1-102-2 (31 x 72 Jnr Door) Steel A-0 RH OUTBD. See WLB-624-001 for description. 0162401A-23 1-105-2 (31 x 69 5/8 Jnr Door) Steel A-0 LH INBD. See WLB-624-001 for description.

0162401A-19 2-54-1 (27 x 76 1/2 Jnr Door) Steel A-0 LH AFT. See WLB-624-001 for description.

0162401A-45 USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 6 (Rev-0) 1.2 Government-furnished property None 2. REFERENCES COAST GUARD DRAWINGS Coast Guard Drawing 225 WLB-624-001, Rev H; Joiner Doors and Curtian Schedule Coast Guard Drawing 225 WLB-631-001, Rev-G; Painting Schedule COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures OTHER REFERENCES Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal 3. REQUIREMENTS 3.1 General.

Fabricate all doors in accordance with CG Drawing 225 WLB-624-001, and preserved in accordance with CG Drawing 225 WLB-631-001. 3.1.1 CIR. None. 3.1.2 Tech Rep. Not applicable. 3.1.3 Protective measures. Not Applicable 3.1.4 Interferences. Not Applicable USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 7 (Rev-0) 3.1.5 Testing.

All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes 3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC SEQUOIA, CWO Lowery, 2700 Omar Street, Port Huron, OH., 48060-8519. 4. NOTES Non