U.S. COAST GUARD BASE ASTORIA AIR STATION RAMP STRIPING

UPDATE 2/06/26

*QUESTIONS AND ANSWERS FROM THE BID WALK THROUGH ON 04FEB26 AT 0900*

1.The stripe thickness is 8" but what Diameter do we want for the inner circle?

Stripe thickness should be 6 inches.  The Circle Should be 8-foot diameter inches In Accordance with the Scope of Work Drawing Notes. Reference Drawing Note No:8
2. What are the sizes of the small numbers along the main taxi way? 

Numbers along the main taxi way should be half the size of the numbers located inside of the circles (2 Feet Tall with Proportionate Width)
3. What is the orientation of the circle numbers/letters and the taxi numbers? want to confirm the orientation in the drawing is correct? 

Orientation in the Drawing is Correct.  Numbers are parallel to the main taxi way. So that they are readable on the way into the ramp.
4. What is the spacing of the US GOV Property? Should i say they should be 2' from the sides and no more than 4' apart evenly spaced?

 Letters U.S. should be no more than 4 feet away from termination points at the sides of the ramp.  “U.S. Government Property” shall be evenly spaced no more than 8' apart

5.  Is the currently dotted line intended to be solid on the new job? 

All New Lines for Taxiway Shall be Solid and Continuous IAW the Drawing in the Scope of Work.

6. What are the Dimensions of the letters “HG” and Numbers located inside of the Circles?

Number and Letter Sizes: The numbers (1-4) and the “HG inside of circles shall be 4 feet tall and proportionate width to not distort. Line widths should be at least 8 inches

7. What is the Hight of “U.S. Government Property” written inside of the Blue Line?

“U.S. Government Property” Should be 10” in height and letters shall be proportionate. Letters should be centered inside the 12” wide blue line.

--break-- 

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

The solicitation number is 70Z03326Q31190021 and is issued as a Request for Quotation (RFQ).

The contract will be awarded based on Lowest Price Technically Acceptable, Technical Capabilities, Past Performance and Price.

Description of Requirement: Base Astoria aviation ramp striping.

The solicitation document and incorporated provisions and clauses are those in effect through FAC# 2025-06 Effective Date 10/01/2025, HSAR 12/26/2024, HSAM October 2009, CGAP 06/20/2025. The Service Contract Act WD # 2015-5577 revision # 29 date of last revision 12/03/2025 applies.

Instructions to offerors, evaluation criteria, and all applicable FAR Provisions and Clauses are attached.

This acquisition is set-aside 100% for SMALL BUSINESS.

The associated NAICS code is 238320.

Size standards in millions of dollars $19.

Description/Statement of Work/Specification: Please refer to attachment – Statement of Work.

Submit quotes to the following e-mail address by the offer due date and time.

Attn: John Mangune E-Mail Address: John.A.Mangune@uscg.mil with solicitation RFQ number 70Z03326Q31190021 in subject line.

All questions regarding this solicitation shall be submitted in writing to the Contracting Officer at john.a.mangune@uscg.mil with solicitation RFQ number 70Z03326Q31190021.

All offers are due to the Contracting Officer at John.A.Mangune@uscg.mil by 8 AM (PST) Monday, February 16, 2026.