Pantheon 3D Printer

This is a supply contract for 3D printers that meet the qualifications below.

Must be delievered by November 14, 2025

Place of Performance: Fort Cavazos, TX 76544

QUANTITY: 2 Pantheon 3D Printers

Please ensure to follow all instructions thoroughly.

Instructions to Offerors:

1. Please look at the attachments and determine if you are qualified for this requirement.
2. Please fill out the document titled “Salient Characteristics”
3. Please provide a quote utilizing the attachment labelled “Technical Specification”. The quote should reflect the chart that is in the attachment titled " Combo Synposis- Solicitation" located under the Schedule of Services on PG. 2

The attachment titled "Specification" will provide guidance on minimum and maximum measurements,

We are looking for a Pantheon ruggedized, high-speed 3D printer. Preferably a Pantheon Design HS-Pro.

Minimum Technical/Performance Requirements

- Build Volume: Minimum 400mm x 400mm x 300mm.

- Machine Dimensions: Approx. 750mm (H) x 670mm (W) x 830mm (D).

- Supported Materials: Must be capable of printing with carbon- and glass-fiber reinforced polymers (e.g., PA12-CF, PA12-GF, PETG-CF) as well as flexible materials.

- System Weight: Approx. 80–85 kg (175–185 lbs.).

- Print Bed: Rigid aluminum tooling plate (or equivalent) with automated leveling capabilities.

- Production Speed: Capable of sustained high throughput printing (minimum 1 kg/day; objective 2 kg/day).

- Motion System: Precision closed-loop servos or equivalent, achieving high accuracy and repeatability.

- Chamber Control: Actively managed heated and cooled chamber to ensure print stability across environmental conditions.

- Power: Standard 120V AC input, maximum draw ~1000W.

- Print Head: Capable of reaching up to 500°C nozzle temperature.

- Print Bed Temperature: Capable of heating to at least 130°C.

- Chamber Temperature: Capable of heating to at least 60°C.

- Resolution: Z resolution of 1.5 μm or better; X/Y resolution of 25 μm or better.

- Maximum Print Speed: At least 1000mm/s.

- Acceleration: At least 15,000mm/s² in X/Y axes.

- User Interface: Touchscreen HMI with connectivity options including CANBUS, Wi-Fi, and USB.

- Maintenance: Designed for low-maintenance operation, targeting less than 1 hour per month during 24/7 production use.

- Durability: Rigid structural frame with metal enclosure capable of long service life under industrial production loads.

- Warranty: Minimum coverage for motion system, electronics, and manufacturer defects consistent with industry standards.

Critical Must-Have Features:

• - Large build volume (≥ 400mm in any axis).
• - Ability to print with high-strength fiber-reinforced polymers.
• - Active chamber management (heating/cooling).
• - High temperature nozzle (≥ 500°C).
• - High bed temperature (≥ 130°C).
• - Closed-loop precision motion control.
• - High throughput (>1 kg/day production).
• - Industrial-grade durability and reliability.

Nice-to-Have Features:

• - Touchscreen HMI with multi-protocol connectivity (Wi-Fi, USB, CANBUS).
• - Extended maintenance intervals (≥ 10X industry average).
• - Low-cost consumables and spare parts.
• - Enterprise-level support packages with 24/7 availability.
• - Advanced monitoring (remote diagnostics, sensors, etc.).

All questions should be submitted by 18 September 2025 by 11:30 AM Central Time (UTC-5)

Please email all questions to

Contract Specialist: Chasity.n.griffin.civ@army.mil.

Contracting Officer: Marcellus.j.Newson.civ@army.mil

Any question submitted will be responded to by 18 September 2025 4:00 PM Central Time (UTC-5). On September 18th, please check here again for the attachment labelled “Questions and Answers”