Building Automation System (BAS) Preventive Maintenance

The U.S. Embassy located in Kigali, Rwanda requires Building Automation System (BAS) Preventative Maintenance (PM) services. The Contractor shall perform BAS PM Services as described in this Statement of Work. The Contractor shall also provide further evaluation of the overall functionality of the BAS based on concerns and input provided to the Contractor by the Facility Manager (FM) and Facility Management Staff (FAC). The Contractor shall provide BAS PM Services for the upkeep of the BAS indicated below in Section “C. BUILDING AUTOMATION SYSTEMS TO BE SERVICED”.

a. The objective of scheduled preventive maintenance is to eliminate system malfunction, breakdown and deterioration. The BAS PM work required shall include, but is not limited to:

Preventative Maintenance; Investigation & troubleshooting; Adjustments; Trend & Alarm configuration; etc...

b. BAS PM Services shall result in all systems serviced under this agreement being in good operational condition when the work is completed c. The Contractor shall provide all necessary managerial, administrative and direct labor personnel as well as all transportation, tools, instrumentation, equipment and supplies required to perform the BAS PM Services defined in this Statement of Work.

The Contractor shall provide the services of qualified, trained, manufacturer certified technicians to perform the required BAS PM services. d. BAS PM Services shall be performed on BAS installed in and/or serving the General Work Areas (GWA) & Public Access Areas (PAA) at Post. e. BAS PM Services shall be performed on BAS installed in the Controlled Access Areas (CAA) Restricted spaces at Post.

Additional clearance and security provisions are required to access and work in these spaces. f. BAS PM Services shall be performed on BAS installed in and/or serving the CAA Core spaces at Post. Additional clearance and security provisions are required to access and work in these spaces.

3. All work shall be accomplished in a manner which conforms to the intent of all applicable IBC, ASHRAE, NFPA/NEC, U.S. EPA, and DOS policy, procedures, and directives; causes no damage to buildings or property; endangers none of the building occupants or workers during these task; and leaves the areas safe for occupancy.