GREAT ONYX JC KENTUCKY LAGOON AERATION IMPROVEMENTS

Work for this project requires the contractor to be responsible for supplying all labor, materials, equipment, utilities, miscellaneous items, freight and delivery and all necessary valid licenses for the work summarized as follows:

1. Furnish and install 480V, 3 PH, 30A feeder from existing panelboard to proposed aeration equipment disconnects.

2. Furnish and install 480V, 3PH, 30A disconnect, including grounding system, post, pipe bollards, and conduits.

3. Furnish and install microbubble lagoon aeration system consisting of the following:

a. Control panel with individual motor overload protection circuit breakers.

b. Self-contained floating microbubble aerators cord connected to control panel with tethers and anchors (4 each).

4. Locate private and utility owned buried electrical lines in the area of work and provide location on as-built plans with reference measurements to existing infrastructure.

5. Furnish third-party inspection of electrical work included in this contract. The project Schedule of Items includes a section to organize the work into Base Items.

1. Provide pricing for all items listed in the Schedule of Items.

2. Contract award will be made for all Base Items.

3. Optional Items may or may not be awarded, depending on fund availability. Base Items 1. Base Item No. 0001 – Lagoon Aeration a. Measurement: This item is measured as a Lump Sum quantity.

2. Payment: The contract lump sum price as shown in the Schedule of Items includes all materials, equipment, labor and incidentals to:

a. Furnish and install 480V, 3 PH, 30A disconnect, including grounding system, post, pipe bollards, and conduits.

b. Furnish and install 480V, 3PH, 30A disconnect, including grounding system, post, pipe bollards, and conduits.

c. Furnish and install microbubble lagoon aeration system consisting of the following:

1. Control panel with individual motor overload protection circuit breakers.

2. Self-contained floating microbubble aerators cord connected to control panel with tethers and anchors (4 each) d. Locate private and utility owned buried electrical lines in the area of work and provide location on as-built plans with reference measurements to existing infrastructure. e. Furnish third-party inspection of electrical work included in this contract.