Skip to content
Abierto

Special notice, first published as sources sought

MICRO-PROFILING SYSTEM

140G0324Q0247

US Geological Survey, Office of Acquisiton Grants. Analytical Laboratory Instrument Manufacturing.

Awarded

Unisense A/S

$39,760.00 obligated so far on USAspending

Description

As published on SAM.gov.

Notice of Intent This is a notice of intent to solicit from a single source. The purpose of this notice is to satisfy the requirements of FAR Subpart 5.101(a)(1) and FAR 5.2. No solicitation will be issued. However, all responsible parties may submit a capability statement by the closing date of this announcement which shall be considered by the agency. A determination not to compete this action based upon responses received is in the sole discretion of the Government.

The U.S. Geological Survey (USGS), Earthquake Science Center (ESC) in Santa Cruz, CA intends to award a purchase order to ¬Unisense A/S for a Micro-profiling System to fulfill the need for precise measurement of oxygen, hydrogen sulfide (H2S), pH, and redox potential in marine sediments throughout a column of sediments without disturbing the depositional layers of the sediment.

The Micro-profiling System must have microsensors and microelectrodes with very small diameters of 10 microns or less for the tips and no more than 10mm for the main glass shaft. It must be able to have very low detection limits of less than or equal to 0.3 µM for oxygen and hydrogen sulfide (H2S), less than or equal to 0.01 pH unit for pH, and less than or equal to 0.1 mV for redox potential.

It must also be able to measure chemical changes on the submillimeter scale in a column of sediment that vary spatially in the x and y planes but especially in the z (depth) plane; precision of the z-axis (depth) down to 10 µm, while on the x- and y-axes the sensor position can be manipulated with 100 µm precision. Unisense AS is the only vendor known to the USGS that can meet the requirement as described above. The PSC for this requirement is 6650 Optical Instruments, Test Equipment, Components and Accessories.

The NAICS code is 334516 Analytical Laboratory Instrument Manufacturing, with an associated size standard of 1,000 employees. Award will be made in accordance with Federal Acquisition Regulation (FAR) 13.106-1(b) and the procedures at FAR Part 12 entitled, Acquisition of Commercial Products and Commercial Services, and FAR Part 13 entitled, Simplified Acquisition Procedures.

Responses or inquiries to this notice of intent shall only be accepted through electronic mail addressed to jongjoco@usgs.gov and must be uploaded and received in their entirety no later than August 23, 2024 at 1200 Eastern. Responses submitted by hardcopy or any web portal shall not be accepted nor considered.

The contract, on USAspending

Federal procurement data the awarding office reported to FPDS, matched to this solicitation by its number.

Recipient
Unisense A/S
UEI
CUWSCM9CJ9K1
CAGE
R4209
Vendor location
Aarhus N
Contract
140G0324P0375, purchase order
Obligated
$39,760.00
Actions
1 between September 9, 2024 and September 9, 2024
Competition
Not Competed Under SAP, 1 offer received
Set-aside reported
No Set Aside Used.
Described as
Micro-Profiling System
Match
solicitation number 140G0324Q0247 equals the FPDS solicitation identifier; same awarding office 140G03 (high confidence)

Publications

Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.

  1. August 7, 2024

    Sources sought

    Due August 12, 2024 at 5:00 PM EDT. SAM.gov, notice 74976308e618449db2cf12175da1e2b1

  2. August 19, 2024

    Special notice, originally sources sought

    Due August 23, 2024 at 12:00 PM EDT. SAM.gov, notice 1a158e366b8f488bb728be3042507e2e

Points of contact