Solicitation, total small business set-aside
USCGC WAESCHE WASHER AND DRYER REQUEST
11702PR2500000XXX
US Coast Guard, SFLC Procurement Branch 2. Ship Building and Repairing.
Response deadline
April 28, 2025 at 11:45 AM EDT
Closed 508 days ago. Posted April 18, 2025, first published March 31, 2025. Scheduled to archive April 28, 2025.
Description
As published on SAM.gov.
Scope of work for Washers & Dryers PR # 11702PR250000304 Purpose and objective: CGC WAESCHE seeks to purchase replacement washers and dryers to renew the failed and failing equipment onboard.
Scope: WAESCHE is seeking commercial grade washers and dryers that can withstand near constant use on a ship that deploys world-wide and experiences heavy seas. The six washers and six dryers need to be able to support over 150 people that deploy aboard approximately six months out of the year. Additionally, the washers and dryers need to be able to fit through non-tight and watertight doors on board the ship. Vendors are encouraged but not required to make a site visit to verify measurements. The narrowest door is approximately 24” wide. The preferred, but not required, make and models are:
Speed Queen washer model# LFNE5BSP115TW01 and Speed Queen dryer model# LDEE5BGS173TW01. Specifications for dryers. Dryers shall be: Able to operate with 230 VAC supplied. The current model installed is capable of operating with 208-240 VAC, 60 Hz, 1-phase. vented utilizing a standard sized dryer duct of 4”.
Must be a heat-pump style, ventless dryers are not acceptable. front load and at least 3.4 cubic feet capacity compatible with washer, be designed to and readily mount on the top of the washer. serviceable meaning parts can be replaced by a qualified service technician. Specifications for washers. Washers shall: operate with 110-120 VAC supplied. accept standard hot and cold potable water connections that are garden hose thread.
Utilize a standard drain hose. front load and at least 7 cubic feet capacity compatible with dryer as mentioned above for mounting. serviceable meaning parts can be replaced by a qualified service technician. The contractor shall: Only provide the items outlined in the scope of work, the unit will not accept substitutions. Not provide labor or services. Removal and installation will be completed by the ship’s crew. Provide quantity of 6 washer and 6 dryers With shipping costs included to the warehouse at 1 Eagle Road, BLDG 42, ATTN:
WAE, Alameda, CA 94501 Required Delivery Date: within five weeks of award of contract.
Publications
Every notice SAM.gov issued under this solicitation number, oldest first. Each is a separate record on SAM.
March 31, 2025
Solicitation
Due April 8, 2025 at 3:00 AM EDT. SAM.gov, notice 617f526e7bae44cda44866d6001dba5a
April 4, 2025
Solicitation
Due April 11, 2025 at 3:00 AM EDT. SAM.gov, notice d96307b4a9ff43808294273a8858f3ba
April 18, 2025
Solicitation
Due April 28, 2025 at 11:45 AM EDT. SAM.gov, notice 218c1c4ef2ff42c5a125367e0ed2ab9f
April 18, 2025
Solicitation
Due April 28, 2025 at 11:45 AM EDT. SAM.gov, notice 2c57e2edcacb43089846b7dbd77c4c34
Points of contact
- Patrick Sickelpatrick.k.sickel@uscg.mil5104375902
- MKCS David SpencerDavid.E.Spencer@uscg.mil5104375902
Also open from this buyer
- CGC OAK WATER TIGHT DOORS, HATCHES, SCUTTLES RENEWALCombined synopsis and solicitationSmall businessNAICS 332321Newport, RI70Z08526Q0027652Closes todaySep 18
- USCGC POLAR STAR MOBILE DTECombined synopsis and solicitationSmall businessNAICS 424720Seattle, WA14501_MOBILE_DTE_FY26Closes tomorrowSep 19
- Heater ElectricSolicitationSmall businessNAICS 333414Maryland70Z08526Q30113B00Closes tomorrowSep 19
- Open, Inspect, Repair Cylinder Assy.Combined synopsis and solicitationSmall businessNAICS 81131070Z08526P49025B00Closes in 3 daysSep 21
- USCGC Stratton Shaft Alignment and Bearing Reaction CheckCombined synopsis and solicitationSmall businessNAICS 811310Alameda, CA70Z08526Q0026058Closes in 3 daysSep 21