SOURCES SOUGHT FOR HYDROCARBON ANALYZER

The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements.

The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide a hydrocarbon analyzer that has equal performance requirements as the TD-120 Oil in Water Monitor with Sample Thief accessory, manufactured by Benchmark Measurement Solutions/Turner Designs Hydrocarbon Instruments, 2525 Alluvial Ave., Ste 161, Clovis, CA 93611. The alternate product/service must meet the following requirements/specifications: Be capable of detecting C24 to C44 hydrocarbons with a detection range below 50 PPB.

Utilize Deep Ultraviolet Fluorescence measurement technology in an online configuration for hydrocarbon detection in a continuous flowing sample. Be capable of accurate measurement in high turbidity conditions. Be capable of operating at ambient temperatures of 1 to 55 degrees C. Signal output must be 4-20 mA based on calibrated concentration of Oil in Water Monitor. Have a touchscreen interface for calibration and configuration of the monitor. Be capable of data logging and storage of diagnostic information.

Allow calibration and maintenance to be performed while the monitor remains in service. Accuracy must be plus or minus 10 percent of calibration range. Acceptable materials: 316/316L stainless steel, Titanium, or Coated mild steel. Operate on a 120 VAC, 60 Hz power supply. Be capable of collecting a discrete water sample at least 1 liter in volume to be used for obtaining laboratory analysis.

Sample collection activated manually, by pre-programmed setting, or by 100-240VAC 60 Hz @ 0.6mA discrete signal from an online water analyzer, monitor, or control system. Automatically record the time, date, measured concentration and process conditions when the sample is collected. Produce a 5-30 VDC or 24-250VAC, 8A maximum signal output for notification when a sample is collected. Produced from designated countries in compliance with FAR 52.225-11.

Enlisted on DOD Information Network (DODIN) Approved Product List (APL). This notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract.

Interested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format.

Also, provide company information and point of contract (name, title, email, phone, mailing address). The Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement. Any information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately.

The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure. Interested parties shall submit information and specifications to Ms. Jessica Shimoda, Contracting Officer via email at jessica.a.shimoda.civ@us.navy.mil. Interested parties responding to this announcement by November 07, 2025 at 2:00 p.m. Hawaii Standard Time will be considered.