Hobart Dishwasher

SOURCES SOUGHT/REQUEST FOR INFORMATION The Department of Defense, United States Air Force (USAF), Air Force Materiel Command (AFMC), Air Force Test Center (AFTC), is currently conducting market research seeking capabilities statement from potential sources, including small businesses (SB), 8(a), HUBZone, Economically Disadvantaged Woman-Owned (EDWOSB), Woman-Owned (WOSB), Service Disabled Veteran Owned (SDVOSB) small businesses that are capable of providing the brand name or equal requirement described below:

Brand Name:

Hobart Model Dishwasher MFR Part No: CLPS66EN-BAS+BUILDUP Kitchen Dishwasher Requirements Hobart Model Dishwater, Conveyor Type required Steam heated conveyor dishwasher Without internal booster Power supply requirements must not exceed 208-240v/60/3-ph Water softening system 10-50 PSI Type150 external steam booster Booster heater control 22” power scrapper Rapid return conveyor drive mechanism with speeds of at least 200 racks/hour Large double door opening Insulated and hinged doors with interlock switches Minimum of 19.5” chamber height opening to accept large sheet pans Stainless steel enclosure panels Microprocessor controls with low temperature & dirty water indicators Pot & pan mode Programable de-lime notification Power scrapper vent cowl curtain kit Steam coil tank heat, stainless steel Left to right operation Vent hood domestic 6 ea Peg rack 2 ea Bun pan rack 1 ea Table limit switch Top mounted micro-processor control module 54” stainless steel clean dish table left to right operation with stainless steel H-Frame legs 16” dish table transition extension Stainless steel dishwasher pant leg duct with trim collar Power supply requirements must not exceed 208-240v/60/3-ph Existing soiled tray table bullnose to be cut and an extension welded in for transition into the new dish machine.

New pant leg duct to be tied directly into trunk line above ceiling and connected to dish machine. Existing duct from FT to be capped off above ceiling. Receive, deliver, and set new equipment in place. Requires Professional Turn-Key Installation of all Equipment, including staging, site survey prior to purchase of equipment, delivery, installation, connection of utilities, startup and parts kit.

All interested vendors shall submit a response demonstrating their capability to provide these items to the Primary Point of Contact listed below. Proposals are not being requested or accepted at this time. As stipulated in FAR 15.201(e), responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation (Request for Proposal) exists at this time; therefore, do not request a copy of the solicitation.

The decision to solicit for a contract shall be solely within the Government’s discretion. The North American Industry Classification System code (NAICS) is 333310, Commercial and Service Industry Machinery Manufacturing, with a size standard of 1000 persons. Respondents should indicate their size in relation to this size standard and indicate socio-economic status (i.e. SB, 8(a), HUBZone, EDWOSB, WOSB, or SDVOSB).

Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a DoD contract. No set-aside decision has been made.

Note that a key factor in determining an acquisition to be a Small Business Set Aside is that small business prime contractors must perform at least 50% of the effort, as defined in FAR Clause 52.219-14. Any information submitted by respondents to this sources sought is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice.

Respondents will not be individually notified of the results of any government assessments. The Government’s assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business, or any particular small business program.

CAPABILITIES STATEMENT: All interested vendors shall submit a capabilities statement that explicitly demonstrates their capability to provide/perform the requirement stated in this notice. The capabilities statement should be brief and concise, yet clearly demonstrate an ability to meet the stated requirement. The response must not exceed 15 pages.

Small businesses with only partial capabilities of this requirement are encouraged to submit their capabilities statement demonstrating the portion of the requirement they are capable of providing/performing. This information will allow the Government to identify areas of possible breakout or possible subcontracting opportunities. Responses may be submitted electronically to the following e-mail address: Joshua.Regans@us.af.mil.

Correspondence sent via email shall contain a subject line that reads “FA2823-24-Q-6007” If this subject line is not included, the e-mail may not get through e-mail filters at Eglin AFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachment. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xsls, or .xls documents are attached to your email. All other attachments may be deleted.

All responsible sources may submit information that shall be considered by the agency. If late information is received, it may be considered, depending on agency time constraints. All routine communications regarding the announcement should be directed to the contractual point of contact listed in this posting. The Government may or may not use any responses to this sources sought as a basis for a subsequent project/requirement.

Any project/requirement developed from the sources sought responses may be the subject of a subsequent acquisition; any such subsequent acquisition will be posted in FedBizOpps.gov separately. Responses to this sources sought will not be returned. The Government is under no obligation to acknowledge receipt of the information received, or provide feedback to the respondents with respect to any of the information submitted under this sources sought.

No requests for a bid package or solicitation will be accepted; a bid package or solicitation does not exist at this time. In order to protect the integrity of any possible future acquisition, no additional information will be provided and no appointments for presentations will be made in reference to this sources sought. Only government employees will review submitted responses to this sources sought.

Respondents are advised that employees of commercial firms under contract with the Government may be used to administratively process submissions and perform other administrative duties requiring access to other contractor’s proprietary information. These administrative support contractors include nondisclosure agreements prohibiting their contractor employees from disclosing any information submitted by other contractors or using such information for any purpose other than that for which it was furnished. RESPONSES ARE DUE NO LATER THAN 12:00 P.M. NOON (CST) ON 29 April 2024. Direct all questions concerning this requirement to Mr. Joshua Regans at Joshua.Regans@us.af.mil.