SOURCES SOUGHT - Clarifier Oil Water Separator

Vendor must provide: SPT-10-E - Clarifier Separator System or other government approve equal and must conform to the following specifications: 1-10 GPM Clarifier Separator with Electric Pump & Control, 120V Approximate dimensions: 7’L x 2’6” W x 4’-10” H 1-10 GPM Above Ground Clarifier Oil/Water Separator with Sludge Hopper Stainless Steel Construction 30-gallon on-board oil storage tank Advanced coalescing media designed to remove oil droplets greater than 20 microns with a Reynolds Number of less than 500 to maintain laminar flow Stainless Steel inclined plates to capture and contain settable solids Solids storage area Single adjustable rotatable pipe skimmers and 120V disk skimmer with timer Neoprene gasketed removable vapor tight cover for access to chamber compartments 2” Inlet/Outlet- FNPT Fitting and two (2) 2” Oil Outlet-FNPT Fitting Two (2) 2” Vent NPT Fittings to vent unit outside, two (2) 2” Sludge drains and two (2) 1” Drain NPT Fittings Effluent compartment for pump out (1) Electric 10 GPM Diaphragm Transfer Pump System with Electric Controller Gravity drain One (1) Corrosion Protection Package with: Separator Interior lined with Tnemec 61, 8-10 mils