Site Visit - Awning and Installation

Manufacture and install two (2) free-standing awnings with walls according to the specifications detailed below. Install each awning on existing concrete pads (one awning per pad) on the East-Northeast side of Building 59. Bury the awning legs 2 inches below the finished surface and secure them with concrete. Provide awning and wall installation instructions.

Specific Requirements: Two (2) custom free-standing awnings with 3 side walls Dimensions: 19’6” (length) x 5’ (width) x 8’ (height) 2/12 shed/monopitch roof, reverse slope with the highest point along the back wall. Gutters shall be manufactured and installed on all sides with down spouts located on the two front corners Material shall be weather resistant Structure shall have a high wind rating of Category “C” In accordance with (IAW) American Society of Civil Engineers (ASCE)/Structural Engineering Institute (SEI)

ASCE/SEI 7, Chap 26. Paint Options: The primary color shall be ROBINS 22 or ROBINS 32 and any accent colors shall be ROBINS 48 or ROBINS 62. Installation: Awning #1 is to be installed on Pad #1, and Awning #2 on Pad #2.