SPS Work Table

. INTRODUCTION Eastern Kansas Healthcare System (EKHCS) Veteran’s Administration, including both the Leavenworth and Topeka campuses, are requesting mobile stainless steel electric height adjustable workstations for the sterile processing services department. Special Purpose Funding has been approved for this request. Because of room restrictions and staff numbers at each location, each SPS campus have varied needs. The requirements highlight those varying workstation needs.

2. SCOPE OF WORK Equipment shall be delivered to the two addresses listed below NLT 30 Days ARO 3. TECHNICAL REQUIREMENTS ELECTRIC TABLE (LVN): Mobile Stainless Steel Electric height adjustable packing & worktables. Three?sided lower frame sub?structure designed to support optional removable shelf. 1 1/4" x 1 1/4" square tubular frame legs. Lift capacity is 1,000 lbs. Comes with (4) 5" swivel casters (2) with brakes. Electrical, 120/1/60 cycle 15-amp service required with 6' long cap and cord NEMA approved.

55.1" W x 31.5" D x 34" to 45" H. (2) MF?191 Single Rear Accessory Back Rail, 21.9" wide. AX11 Back rail shelf. Dimensions W x D: 27.25" x 13.75" (2) CE13 Stainless steel wire basket.

Size: 22 5/8" x 10 7/8" x 5 1/8" (2) AX16 Stainless steel rear packing table rail angle brackets to slope baskets AX10 Support Rail for plastic or stainless-steel containers. Plastic bins not included. AX05?5 Plastic Tilt Bins 5 Section. DR?191?3 3 Drawer Cabinet. CMD2018KIT CMD2018 Dual Monitor Arm Bundle. Can accommodate monitors up to 28.5" wide and up to 12 LBs each. II.

ELECTRIC TABLE (TOP): Mobile Stainless Steel Electric height adjustable packing & worktables. Three?sided lower frame sub?structure designed to support optional removable shelf. 1 1/4" x 1 1/4" square tubular frame legs. Lift capacity is 1,000 lbs. Comes with (4) 5" swivel casters (2) with brakes. Electrical, 120/1/60 cycle 15-amp service required with 6' long cap and cord NEMA approved. 86.6" W x 31.5" D x 34" to 45" H. MF?191 Single Rear Accessory Back Rail, 21.9" wide. 2 ea.

AX11 Back rail shelf Dimensions W x D: 27.25" x 13.75" 4 ea. CE13 Stainless steel wire basket Size: 22 5/8" x 10 7/8" x 5 1/8" AX16 Stainless steel rear packing table rail angle brackets to slope baskets. AX10 Support Rail for plastic or stainless-steel containers. Plastic bins not included. AX05?5 Plastic Tilt Bins 5 Section. 2 ea. DR?191?3 3 Drawer Cabinet. SARM?LAMP?LED LED Magnifier Light CMD2018KIT CMD2018 Dual Monitor Arm Bundle Can accommodate monitors up to 28.5" wide and up to 12 LBs each. III.

MOBILE PACKING AND WORKTABLE (LVN): Stainless steel packing and worktable 300 series SS, cross braces. Comes with (4) 5" swivel casters (2) with brakes. 79" W x 31.5" D x 36" H LS?191?20 Stainless steel lower solid shelf for packing table. PSBAR?8 8?Outlet Vertical Power Strip, 120V, 15A, 15?ft. Cord, 5?15P, 24 in. Lighted, covered on/Off switch and 15?amp circuit breaker.

AX18 Surge protector holder for AX191 and AXCR191 series tab 4.DELIVERABLES 191AXCR?ELEC140 (LVN) – Mobile Electric Hydraulic Table Manufacturer – KTW Group, Inc. Part No – 191AXCR?ELEC140 Qty – 4 EA 191AXCR-200 (LVN) – Stainless Steel Packing and Worktable Manufacturer – KTW Group, Inc. Part No – 191AXCR-200 Qty –1 EA 191AXCR?ELEC220 (TOP) – Mobile Electric Hydraulic Table Manufacturer – KTW Group, Inc. Part No – 191AXCR?ELEC220 Qty – 2 EA Install – Install of the 7 items. Qty – 7 Install 5. DELIVERY & POC INFORMATION All items shall be delivered to the addresses below:

Dwight D. Eisenhower VA Medical Center 4101 S. 4th Street Leavenworth, KS 66048 Colmery O’Neil VA Medical Center 2200 SW Gage Blvd. Topeka, KS 66622 Facility POC: Can be provided at time of award.