Fire Extinguisher Maintenance & Repair Q & A

This PWS provides for annual inspection, maintenance/repair, refill/recharge/discharge, and hydrostatic testing for all fire extinguishers utilized by DOTS and all MCoE Training Brigades for facilities and vehicles per Army Regulation. The contractor is expected to service and or replace the extinguishers if the regulation warrants.

Contractor shall furnish all supervision, licensed personnel, equipment, tools, labor, material, parts, transportation, and waste disposal necessary to perform the required work for the extinguishers. The services requested will not be for all extinguishers at one time but as they become unserviceable and/or they are due routine services over the course of time at numerous intervals and dates.

The contractor must be able to gain access onto Fort Moore, GA to pick up and/or deliver the various types or fire extinguishers one (1) time a month. The types of extinguishers requiring servicing include, but are not limited to Co2, and Dry Chemical in sizes ranging from 2.5 pounds up to 34 pounds.

MCoE organizations and DOTS have various types of buildings which will require Multipurpose Dry Chemical fire extinguishers such as Class A, B, and C. Extinguisher components requiring servicing and repair shall include, but is not limited to, O-ring, valve stems, gauges, hose bands and clips, pull pin, nozzles, or as deemed necessary, all other fire extinguisher components.