The Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.
\n\n\n\nThe Scope of Work has been attached to give more details about this requirement.
\n\n\n\nsee solicitaiton for details.
\n\n\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).
\n\n\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.
\n\n\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the "Reason for Request" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.
\n\n\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.
","text":"The Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.\n\nThe Scope of Work has been attached to give more details about this requirement.\n\nsee solicitaiton for details.\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the \"Reason for Request\" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.","origin":"detail"},"notice_type":{"code":"o","label":"Solicitation"},"schema_version":1,"solicitation_number":"W519TC26QA190","place_of_performance":{"zip":"61299","city":{"code":"65078","name":"Rock Island"},"state":{"code":"IL","name":"Illinois"},"country":{"code":"USA","name":"UNITED STATES"}},"product_service_code":"9640"},{"dates":{"posted":"2026-09-14","posted_at":"2026-09-14T17:35:58.197Z","created_at":"2026-09-14T17:34:54.218Z","modified_at":"2026-09-14T17:35:58.204Z","response_deadline":{"raw":"2026-09-15T10:00:00-05:00","utc":"2026-09-15T15:00:00Z","date":"2026-09-15","time":"10:00:00","timezone":"America/Chicago","utc_offset_seconds":-18000}},"links":{"sam":"https://sam.gov/workspace/contract/opp/d7243eb0c5954dfe9cc643ead0855ccb/view"},"naics":{"codes":["332999"],"primary":"332999"},"title":"Precision Gear and Spline Cutting","agency":{"office":{"code":"W519TC","name":"W6QK ACC-RI"},"subtier":{"code":"2100","name":"DEPT OF THE ARMY"},"department":{"code":"021","name":"DEPT OF DEFENSE"},"office_address":{"zip":"61299-0000","city":"ROCK ISLAND","state":"IL","country":"USA"},"organization_id":"500181913","organization_type":"OFFICE"},"status":{"active":true,"latest":true,"deleted":false,"archived":false,"cancelled":false,"publication":"published","archive_date":"2026-09-30","archive_type":"auto15"},"history":[{"index":4,"title":"Precision Gear and Spline Cutting","action":"publish","latest":true,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-09-14T17:35:58.197Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"d7243eb0c5954dfe9cc643ead0855ccb","solicitation_number":"W519TC26QA190","parent_opportunity_id":"428e1f872bee486c8c13739f71a89a7a"},{"index":3,"title":"Precision Gear and Spline Cutting","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-09-11T15:33:01.955Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"de3ff1c0ad0b4d17b4b64c9885283d26","solicitation_number":"W519TC26QA190","parent_opportunity_id":"428e1f872bee486c8c13739f71a89a7a"},{"index":2,"title":"Precision Gear and Spline Cutting","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-09-01T13:32:23.046Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"b6631bf49fd54c72a91650cab69d6a37","solicitation_number":"W519TC26QA190","parent_opportunity_id":"428e1f872bee486c8c13739f71a89a7a"},{"index":1,"title":"Precision Gear and Spline Cutting","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-08-27T12:14:21.412Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"submit","opportunity_id":"428e1f872bee486c8c13739f71a89a7a","solicitation_number":"W519TC26QA190"}],"contacts":[{"name":"Brandy Huesmann","role":"primary","email":"brandy.m.huesmann.civ@army.mil"},{"name":"Kelly Hendricks","role":"secondary","email":"kelly.d.hendricks5.civ@army.mil"}],"base_type":{"code":"o","label":"Solicitation"},"notice_id":"d7243eb0c5954dfe9cc643ead0855ccb","lineage_id":"428e1f872bee486c8c13739f71a89a7a","provenance":{"detail":{"endpoints":["opportunity","resources","history"],"fetched_at":"2026-09-16T09:37:57.548980606Z"},"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/datagov/ContractOpportunitiesFullCSV.csv","etag":"\"3f59209463433eba6899e195a597c64d-29\"","fetched_at":"2026-09-16T07:50:12.777658Z","row_sha256":"fcf932790eb4dc2a4bbaf09a087f2bd00223c8f3eadff3d18aa29e69fa971f54","last_modified":"2026-09-16T03:30:52Z"},"updated_at":"2026-09-16T09:37:57.548980606Z","first_seen_at":"2026-09-15T22:52:52.472456Z"},"description":{"html":"Contractor questions with Government answers are available.
\n\n\n\nThe Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.
\n\n\n\nThe Scope of Work has been attached to give more details about this requirement.
\n\n\n\nsee solicitaiton for details.
\n\n\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).
\n\n\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.
\n\n\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the "Reason for Request" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.
\n\n\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.
","text":"Contractor questions with Government answers are available.\n\nThe Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.\n\nThe Scope of Work has been attached to give more details about this requirement.\n\nsee solicitaiton for details.\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the \"Reason for Request\" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.","origin":"detail"},"notice_type":{"code":"o","label":"Solicitation"},"schema_version":1,"solicitation_number":"W519TC26QA190","place_of_performance":{"zip":"61299","city":{"code":"65078","name":"Rock Island"},"state":{"code":"IL","name":"Illinois"},"country":{"code":"USA","name":"UNITED STATES"}},"product_service_code":"9640"}],"due_at":"2026-09-15T15:00:00Z","due_date":"2026-09-15","closes_at":"2026-09-15T15:00:00Z","awardable":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","state":"IL","country":"USA","winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z","principal_notice_id":"d7243eb0c5954dfe9cc643ead0855ccb","description":{"text":"Contractor questions with Government answers are available.\n\nThe Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.\n\nThe Scope of Work has been attached to give more details about this requirement.\n\nsee solicitaiton for details.\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the \"Reason for Request\" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.","html":"Contractor questions with Government answers are available.
\n\n\n\nThe Scope of Work has been updated, specifically section 5 . Final Deliverables. See Scope of Work v3 for details.
\n\n\n\nThe Scope of Work has been attached to give more details about this requirement.
\n\n\n\nsee solicitaiton for details.
\n\n\n\nThe proposed contract action is for precision gear and spline cutting IAW drawings 10923030, 10925678, 10925679, 10925680 and 10953662 in support of the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC).
\n\n\n\nA determination by the Government to not compete with this proposed contract based upone responses to this notice is solely within the discretion of the Government. The Government reserves the right to award no contract at all. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
\n\nDrawings are referenced in this soliciation. Please keep in mind that the Contract Specialist IS NOT the person who attaches drawings for availability OR provides access/approval to JCP or in the Contract Opportunities within SAM.gov system. Attachment of drawings AND access approval may take up to 48 hours to be reviewed and approved.
\n\n\n\nDrawings will be posted on SAM.gov, however, based on their Distribution status, explicit access may be required which means that the contractor must request access in SAM.gov and will not be accepted unless they have an approved JCP account. Contractors must already have JCP approval to gain access to drawings. Next, Contractors should login to SAM.gov and access Contract Opportunities to request access to the drawings, please include your CAGE CODE in the "Reason for Request" block. It is required that the person requesting access in the person that submitted the DD2345 to JCP for approval initially as they are considered the Data Custodian. If this person is not the one requesting, your request will be denied.
\n\n\n\n**PLEASE NOTE: If you are requesting access to drawings and have not recently requested drawings for another ACC-RI opportunity, you may not be on the list for approval at ACC-RI and may be requested to submit your DD2345.
","origin":"detail"},"contacts":[{"name":"Brandy Huesmann","role":"primary","email":"brandy.m.huesmann.civ@army.mil"},{"name":"Kelly Hendricks","role":"secondary","email":"kelly.d.hendricks5.civ@army.mil"}],"place_of_performance":{"zip":"61299","city":{"code":"65078","name":"Rock Island"},"state":{"code":"IL","name":"Illinois"},"country":{"code":"USA","name":"UNITED STATES"}},"office_address":{"zip":"61299-0000","city":"ROCK ISLAND","state":"IL","country":"USA"},"naics_codes":["332999"],"award":null,"attachments":[{"resource_id":"7e28d3af70144bc28147fe630a1d2b9c","name":"DRAWING 10925679.pdf","kind":"file","mime_type":".pdf","size_bytes":235783,"posted_at":"2026-08-27T12:14:21.412Z","export_controlled":false,"sha256":null,"url":"https://sam.gov/api/prod/opps/v3/opportunities/resources/files/7e28d3af70144bc28147fe630a1d2b9c/download","mirrored":false}],"awards":[],"related":[{"key":"W519TC26Q8816","latest_notice_id":"d8624e3ec22a405aaed9519c2195c0db","title":"CLAMP, SUPPORT (FORGING)","solicitation_number":"W519TC26Q8816","notice_type":"k","first_type":"k","first_posted":"2026-09-10","last_posted":"2026-09-10","notices":1,"due_at":"2026-09-16T16:00:00Z","due_date":"2026-09-16","closes_at":"2026-09-16T16:00:00Z","awardable":true,"open":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","naics":"332111","psc":"3680","set_aside":null,"state":"IL","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z"},{"key":"W519TC26QA214","latest_notice_id":"b90891ca285d4d439622dbb94a39ced8","title":"Pine Bluff Arsenal Intrusion Detection System","solicitation_number":"W519TC-26-Q-A214","notice_type":"k","first_type":"k","first_posted":"2026-09-10","last_posted":"2026-09-14","notices":3,"due_at":"2026-09-16T17:00:00Z","due_date":"2026-09-16","closes_at":"2026-09-16T17:00:00Z","awardable":true,"open":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","naics":"561621","psc":"J063","set_aside":null,"state":"AR","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z"},{"key":"W519TC26QA086","latest_notice_id":"b6f9d6081c4140839c2e10da10fad488","title":"M48 Filter Coating and Painting","solicitation_number":"W519TC-26-Q-A086","notice_type":"k","first_type":"k","first_posted":"2026-06-24","last_posted":"2026-09-01","notices":8,"due_at":"2026-09-16T17:00:00Z","due_date":"2026-09-16","closes_at":"2026-09-16T17:00:00Z","awardable":true,"open":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","naics":"325510","psc":"K099","set_aside":null,"state":"AR","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z"},{"key":"W519TC26QA199","latest_notice_id":"8a221b64f78544cab81a7bdf6fea85af","title":"Wafer Broach Holding Bars","solicitation_number":"W519TC26QA199","notice_type":"o","first_type":"o","first_posted":"2026-09-09","last_posted":"2026-09-09","notices":1,"due_at":"2026-09-16T18:00:00Z","due_date":"2026-09-16","closes_at":"2026-09-16T18:00:00Z","awardable":true,"open":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","naics":"334416","psc":"5905","set_aside":"SBA","state":"IL","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z"},{"key":"W519TC26QA184","latest_notice_id":"69db0e3560a44d059119f620faa0f179","title":"Vacuum Furnace Cell","solicitation_number":"W519TC26QA184","notice_type":"o","first_type":"r","first_posted":"2026-08-17","last_posted":"2026-09-10","notices":5,"due_at":"2026-09-16T19:00:00Z","due_date":"2026-09-16","closes_at":"2026-09-16T19:00:00Z","awardable":true,"open":true,"dept_key":"d-021","dept_name":"DEPT OF DEFENSE","sub_key":"s-2100","sub_name":"DEPT OF THE ARMY","office_key":"o-W519TC","office_name":"W6QK ACC-RI","naics":"333994","psc":"3424","set_aside":"SBA","state":"IL","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z"}]}