Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out. This DAC from Los Alamos National Laboratory tackles that weakness head-on. It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs. The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over.
\n\nChallenges
\n\nDirect air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream. Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2. Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air. Their weakness is durability. At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate. Both effects wear the sorbent down over repeated cycles. Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment.
\n\nProblems Solved
\n\nDAC changes how the sorbent gives up its captured carbon. First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures. Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2. Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored. The method is designed to prevent sorbent degradation and erosion. The application sets performance goals ranging from at least 50% of original capacity after five cycles to as much as 99% across 500 cycles. It applies to widely used amine sorbents, on supports that include silica, alumina, carbon materials and cellulose. Longer sorbent life means lower operating costs and a stronger economic case for direct air capture.
\n\nAdvantages
\n\nMarket Applications
\n\nTRL 2
\n\nS-167699
\n\nLA-UR-26-29519
\n\n\n\nLANL Tech Partnerships: Unlock the Innovative Potential
\n\nLos Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.
\n\nLANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.
\n\nNote: This is not a call for external services for the development of this technology.
\n\nhttps://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology
\n\nm.lanl.gov/tech-search
\n\n","text":"Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out. This DAC from Los Alamos National Laboratory tackles that weakness head-on. It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs. The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over.\n\nChallenges\n\nDirect air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream. Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2. Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air. Their weakness is durability. At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate. Both effects wear the sorbent down over repeated cycles. Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment.\n\nProblems Solved\n\nDAC changes how the sorbent gives up its captured carbon. First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures. Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2. Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored. The method is designed to prevent sorbent degradation and erosion. The application sets performance goals ranging from at least 50% of original capacity after five cycles to as much as 99% across 500 cycles. It applies to widely used amine sorbents, on supports that include silica, alumina, carbon materials and cellulose. Longer sorbent life means lower operating costs and a stronger economic case for direct air capture.\n\nAdvantages\n\n• Extends the useful life of capture sorbents and slows their breakdown\n\n• Lowers operating costs by reducing how often sorbent must be replaced\n\n• Works with many established amine sorbents and support materials\n\n• Captures carbon at normal outdoor temperatures and pressures\n\n• Delivers a high-purity CO2 stream for storage or reuse\n\n• Improves the overall economics of carbon removal projects\n\nMarket Applications\n\n• Carbon removal and climate technology (direct air capture plants, carbon removal credit projects)\n\n• Carbon storage and utilization (geologic storage, CO2-to-fuels and chemicals)\n\n• Industrial gases (captured CO2 supply for food, beverage and manufacturing uses)\n\n• Sorbent and specialty materials (advanced adsorbent production, sorbent coatings)\n\n• Air handling and indoor environments (CO2 scrubbing in buildings, enclosed or controlled spaces)\n\n• Energy and heavy industry (decarbonization strategies for utilities, oil and gas companies and manufacturers)\n\nTRL 2\n\nS-167699\n\nLA-UR-26-29519\n\nLANL Tech Partnerships: Unlock the Innovative Potential\n\nLos Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.\n\nLANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.\n\nNote: This is not a call for external services for the development of this technology.\n\nhttps://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology\n\nm.lanl.gov/tech-search","origin":"detail"},"notice_type":{"code":"s","label":"Special Notice"},"schema_version":1,"solicitation_number":"S-167699","place_of_performance":{"zip":"87545","city":{"code":"42320","name":"Los Alamos"},"state":{"code":"NM","name":"New Mexico"},"country":{"code":"USA","name":"UNITED STATES"}},"product_service_code":"AH52"}],"due_at":"2026-11-18T00:00:00Z","due_date":"2026-11-17","closes_at":"2026-11-18T00:00:00Z","awardable":false,"dept_key":"d-089","dept_name":"ENERGY, DEPARTMENT OF","sub_key":"s-8900","sub_name":"ENERGY, DEPARTMENT OF","office_key":"o-899015","office_name":"TRIAD - DOE CONTRACTOR","state":"NM","county":"35028","county_name":"Los Alamos County","city":"3542320","city_name":"Los Alamos","country":"USA","state_source":null,"state_evidence":null,"site_key":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-10-28T04:01:09.175983Z","principal_notice_id":"3cd0cadfb268459489e12a984ff7a7e6","description":{"text":"Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out. This DAC from Los Alamos National Laboratory tackles that weakness head-on. It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs. The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over.\n\nChallenges\n\nDirect air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream. Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2. Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air. Their weakness is durability. At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate. Both effects wear the sorbent down over repeated cycles. Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment.\n\nProblems Solved\n\nDAC changes how the sorbent gives up its captured carbon. First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures. Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2. Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored. The method is designed to prevent sorbent degradation and erosion. The application sets performance goals ranging from at least 50% of original capacity after five cycles to as much as 99% across 500 cycles. It applies to widely used amine sorbents, on supports that include silica, alumina, carbon materials and cellulose. Longer sorbent life means lower operating costs and a stronger economic case for direct air capture.\n\nAdvantages\n\n• Extends the useful life of capture sorbents and slows their breakdown\n\n• Lowers operating costs by reducing how often sorbent must be replaced\n\n• Works with many established amine sorbents and support materials\n\n• Captures carbon at normal outdoor temperatures and pressures\n\n• Delivers a high-purity CO2 stream for storage or reuse\n\n• Improves the overall economics of carbon removal projects\n\nMarket Applications\n\n• Carbon removal and climate technology (direct air capture plants, carbon removal credit projects)\n\n• Carbon storage and utilization (geologic storage, CO2-to-fuels and chemicals)\n\n• Industrial gases (captured CO2 supply for food, beverage and manufacturing uses)\n\n• Sorbent and specialty materials (advanced adsorbent production, sorbent coatings)\n\n• Air handling and indoor environments (CO2 scrubbing in buildings, enclosed or controlled spaces)\n\n• Energy and heavy industry (decarbonization strategies for utilities, oil and gas companies and manufacturers)\n\nTRL 2\n\nS-167699\n\nLA-UR-26-29519\n\nLANL Tech Partnerships: Unlock the Innovative Potential\n\nLos Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.\n\nLANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.\n\nNote: This is not a call for external services for the development of this technology.\n\nhttps://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology\n\nm.lanl.gov/tech-search","html":"Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out. This DAC from Los Alamos National Laboratory tackles that weakness head-on. It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs. The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over.
\n\nChallenges
\n\nDirect air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream. Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2. Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air. Their weakness is durability. At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate. Both effects wear the sorbent down over repeated cycles. Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment.
\n\nProblems Solved
\n\nDAC changes how the sorbent gives up its captured carbon. First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures. Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2. Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored. The method is designed to prevent sorbent degradation and erosion. The application sets performance goals ranging from at least 50% of original capacity after five cycles to as much as 99% across 500 cycles. It applies to widely used amine sorbents, on supports that include silica, alumina, carbon materials and cellulose. Longer sorbent life means lower operating costs and a stronger economic case for direct air capture.
\n\nAdvantages
\n\nMarket Applications
\n\nTRL 2
\n\nS-167699
\n\nLA-UR-26-29519
\n\n\n\nLANL Tech Partnerships: Unlock the Innovative Potential
\n\nLos Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.
\n\nLANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.
\n\nNote: This is not a call for external services for the development of this technology.
\n\nhttps://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology
\n\nm.lanl.gov/tech-search
\n\n","origin":"detail"},"contacts":[{"name":"Kathleen McDonald","role":"primary","email":"licensing@lanl.gov"},{"name":"Lindsay Augustyn","role":"secondary","email":"licensing@lanl.gov"}],"place_of_performance":{"zip":"87545","city":{"code":"42320","name":"Los Alamos"},"state":{"code":"NM","name":"New Mexico"},"country":{"code":"USA","name":"UNITED STATES"}},"office_address":{"zip":"43201","city":"Columbus","state":"OH","country":"USA"},"naics_codes":["541715"],"award":null,"attachments":[],"awards":[],"related":[],"similar_open":[{"key":"FA945326RX012","latest_notice_id":"66e65030976540fb89838cb0d6b1bae4","title":"Space Environment Technologies and Science (SETS) Broad Agency Announcement (BAA) Call 004","solicitation_number":"FA945326RX012","notice_type":"o","first_type":"o","first_posted":"2026-09-30","last_posted":"2026-10-29","notices":9,"due_at":"2026-11-13T20:00:00Z","due_date":"2026-11-13","closes_at":"2026-11-13T20:00:00Z","awardable":true,"open":true,"removed":false,"dept_key":"d-097","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA9453","office_name":"FA9453 AFRL RJZ","naics":"541715","psc":"AC12","set_aside":null,"state":"NM","county":"35001","county_name":"Bernalillo County","city":"3502000","city_name":"Albuquerque","country":"USA","place_scope":"site","state_source":null,"state_evidence":null,"site":null,"site_key":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"removed_at":null,"updated_at":"2026-10-30T03:41:17.879115Z"},{"key":"FA945326XA001","latest_notice_id":"4b95b0da715b4a958f295cae7e54f6df","title":"STAR-FISH CALL 017 - Secure By Design","solicitation_number":"FA945326XA001","notice_type":"o","first_type":"o","first_posted":"2026-08-24","last_posted":"2026-10-22","notices":11,"due_at":"2026-11-13T23:00:00Z","due_date":"2026-11-13","closes_at":"2026-11-13T23:00:00Z","awardable":true,"open":true,"removed":false,"dept_key":"d-097","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA9453","office_name":"FA9453 AFRL RJZ","naics":"541715","psc":"AJ12","set_aside":null,"state":"NM","county":"35001","county_name":"Bernalillo County","city":"3536300","city_name":"Kirtland AFB","country":"USA","place_scope":"site","state_source":null,"state_evidence":null,"site":null,"site_key":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"removed_at":null,"updated_at":"2026-10-23T03:46:32.604852Z"},{"key":"MULTISOURCEPNTRFI01","latest_notice_id":"3c77bdbdd8c04d20a0ad2c5cea888f0a","title":"Request for Information: Multi-Source PNT UE","solicitation_number":"MultiSourcePNT_RFI_01","notice_type":"p","first_type":"p","first_posted":"2026-09-28","last_posted":"2026-10-29","notices":2,"due_at":"2026-11-16T21:00:00Z","due_date":"2026-11-16","closes_at":"2026-11-16T21:00:00Z","awardable":true,"open":true,"removed":false,"dept_key":"d-097","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA9453","office_name":"FA9453 AFRL RJZ","naics":"541715","psc":"AC12","set_aside":null,"state":"NM","county":"35001","county_name":"Bernalillo County","city":"3536300","city_name":"Kirtland AFB","country":"USA","place_scope":"site","state_source":null,"state_evidence":null,"site":null,"site_key":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"removed_at":null,"updated_at":"2026-10-30T03:41:17.879115Z"}],"similar_open_total":127}