# TECHNOLOGY LICENSING OPPORTUNITY: GasFlow DLP Printing Interface Canonical: https://abierto.us/opportunities/s133794 - Solicitation number: S-133794 - Notice type: Special notice - Status: Closed. Deadline was April 6, 2027 at 7:00 PM EDT - Department: Department of Energy - Contracting office: Triad - DOE Contractor (899015) - NAICS: 333248 All Other Industrial Machinery Manufacturing - Product or service code: 3695 Miscellaneous Special Industry Machinery - Place of performance: Los Alamos, New Mexico - Who can bid, by location: Anywhere in the US. Location does not limit who can bid: a product shipped to the buyer, research at the performer's facility, or work at the contractor's site. A state shown is the delivery point. - County: Los Alamos County (FIPS 35028). https://abierto.us/counties/los-alamos-county-nm-35028 - City: Los Alamos. https://abierto.us/cities/los-alamos-nm-3542320 - First posted: November 6, 2026 - Last posted: November 6, 2026 - SAM.gov: https://sam.gov/workspace/contract/opp/729372a5f1764be4b032289c1ae4dd8a/view ## Description GasFlow DLP Printing Interface, developed by scientists at Los Alamos National Laboratory, helps resin-based 3D printing systems produce finer details, faster builds and more consistent part quality by controlling oxygen where curing happens most critically. The open-surface approach fits well with bottom-up DLP and related vat photopolymer processes, and it can enhance existing printer designs, as well as new platforms, by improving print fidelity, process stability and material flexibility. How it Works The system adds a second liquid beneath the printable resin inside the vat, creating a stable fluid-fluid interface between the two liquids. This interface is where the resin is polymerized, removing the need to pull the polymerized layer off the surface - an inherent default in the DLP process. The lower liquid is chosen to be an immiscible, high-density fluid, such as a perfluorinated fluid, that is treated with an inert gas and circulated continuously during printing. As it flows beneath the resin and above the transparent vat window, the lower liquid removes oxygen from the resin and introduces inert gas in its place, which reduces oxygen inhibition at the curing zone. With less oxygen interfering with polymerization, projected light can cure smaller features more reliably, more quickly and more uniformly across the part with less bleeding. Technical Description The patented GasFlow DLP Printing Interface is designed for additive manufacturing methods such as DLP, SLA and related photopolymer printing processes. The GasFlow DLP Printing Interface uses a first container or vat with a transparent portion, a first fluid positioned against that transparent portion and a second fluid that serves as the printable resin. The first fluid and second fluid form a fluid-fluid interface, with the first fluid located between the vat window and the resin. A circulation system moves the first fluid through the vat and an associated treatment container by way of conduits and a pumping mechanism. In representative embodiments, the first fluid is a perfluorinated solvent that has been treated with an inert gas such as nitrogen, helium, argon or carbon dioxide. As the treated first fluid circulates, it removes oxygen from resin at the interface and helps replace that oxygen with inert gas, which improves polymerization performance at the print surface. Oxygen in standard resin systems can suppress curing, which means more energy is required than necessary which in turn can create uneven polymerization that leaves parts overcured in some regions and undercured in others making very small features difficult to print. Features below about 50 microns in diameter may fail to print when normal oxygen levels are present. GasFlow DLP Printing demonstrated print speed improvement of at least one-third, with larger gains considered possible under optimized conditions. An added benefit to flowing fluid is that the system can provide temperature-control to help manage heat buildup during printing, which can improve part quality and widen the range of usable resin chemistries. Advantages Produces finer features and higher print resolution Reduces oxygen-related defects during curing Speeds printing compared with standard setups (oxygen exposed) Improves consistency across the part, including edge-to-center uniformity Supports retrofit potential for many bottom-up DLP printers Increases lifetime of liquid resin May enable use of resin chemistries that are otherwise difficult to process because of overheating or curing instability Market Applications Additive Manufacturing (resin 3D printers, printer upgrades, production platforms) Industrial Manufacturing (precision polymer parts, lightweight structures, fabrication tooling) Medical and Dental (custom polymer components, device fabrication, detailed models) Electronics and Microfabrication (fine-feature polymer structures, patterned parts, prototyping) Research and Laboratory Equipment (materials development, process testing, advanced printing systems) Aerospace and Defense (complex geometries, lattice structures, specialty components) TRL 4 US Patent No. 11,911,955 LA-UR-26-29477 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. **Note:** This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search ## Open now in the same industry 6 open in NAICS 333248. - Radia Paint Shakers (W911KF27QA007), due November 9, 2026 at 10:00 AM EST. https://abierto.us/opportunities/w911kf27qa007 - HOIST,HOOK (SPE8EE27T0334), due November 9, 2026. https://abierto.us/opportunities/spe8ee27t0334 - Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO (W519TC26ACSO), due November 10, 2026 at 1:00 PM EST. https://abierto.us/opportunities/w519tc26acso ## Publications - November 6, 2026: Special notice, due April 6, 2027 at 7:00 PM EDT. Notice 729372a5f1764be4b032289c1ae4dd8a. https://sam.gov/workspace/contract/opp/729372a5f1764be4b032289c1ae4dd8a/view ## Points of contact - Satya Srinivasan, licensing@lanl.gov - Lindsay Augustyn, licensing@lanl.gov --- Source: SAM.gov Contract Opportunities bulk extract. Confirm deadlines on SAM.gov before responding. Cite https://abierto.us/opportunities/s133794.