The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for an electrical meter that has equal performance requirements as the Schneider Electric PowerLogic ION8650 Power and Energy, manufactured by Schneider Electric USA, Inc., 800 Federal St, Andover, MA 01810-1067. The alternate product/service must meet the following requirements/specifications:
\n\nListed on AF’s Advanced Meter Reading System (AMRS) Compliant Meter List
\n\tMeter must comply with ANSI C12.1, NEMA C12.19, and ANSI C12.20 and must match existing AMRS reading system at the installation.
\n\tMeter must be rated for use at temperature from minus 40 degrees Centigrade to plus 70 degrees Centigrade.
\n\tThe meters must have an electronic demand recording register and must be secondary reading as indicated. The register must be used to indicate maximum kilowatt demand as well as cumulative or continuously cumulative demand. Demand must be measured on a block-interval basis and must be capable of a 5 to 60 minute interval and initially set to a 15-minute interval. It must have provisions to be programmed to calculate demand on a rolling interval basis. Meter readings must be true RMS.
\n\tThe meter electronic register must be of modular design with non-volatile data storage. Downloading meter stored data must be capable via an optical port. Recording capability of data storage with a minimum capability of 89 days of 15 minute, 2 channel interval data. The meter must be capable of providing at least 2 KYZ pulse outputs (dry contacts).
\n\tMeter must have an optical port on front of meter. Optical device must be compatible with ANSI C12.18.
\n\tMeters must be 120-480 volts auto ranging.
\n\tPower Quality: sag/swell, individual, even, odd, total harmonics to the 31st and symmetrical components
\n\t9S, 35S, 36S socket and switchboard cases
\n\tTrue RMS 3-phase voltage, current, power and meets ANSI revenue metering standards including ANSI C12.20 0.2 and Class 2, 10, & 20.
\n\tThis notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract.
\n\nInterested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format. Also, provide company information and point of contract (name, title, email, phone, mailing address).
\n\nThe Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement.
\n
\nAny information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure.
\n
\nInterested parties shall submit information and specifications to Shae Ishimoto, Contract Specialist, via email at shae.n.ishimoto.civ@us.navy.mil. Interested parties responding to this announcement by 9 November, 2026 at 10:00 A.M. Hawaii Standard Time will be considered.
The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for an electrical meter that has equal performance requirements as the Schneider Electric PowerLogic ION8650 Power and Energy, manufactured by Schneider Electric USA, Inc., 800 Federal St, Andover, MA 01810-1067. The alternate product/service must meet the following requirements/specifications:
\n\nListed on AF’s Advanced Meter Reading System (AMRS) Compliant Meter List
\n\tMeter must comply with ANSI C12.1, NEMA C12.19, and ANSI C12.20 and must match existing AMRS reading system at the installation.
\n\tMeter must be rated for use at temperature from minus 40 degrees Centigrade to plus 70 degrees Centigrade.
\n\tThe meters must have an electronic demand recording register and must be secondary reading as indicated. The register must be used to indicate maximum kilowatt demand as well as cumulative or continuously cumulative demand. Demand must be measured on a block-interval basis and must be capable of a 5 to 60 minute interval and initially set to a 15-minute interval. It must have provisions to be programmed to calculate demand on a rolling interval basis. Meter readings must be true RMS.
\n\tThe meter electronic register must be of modular design with non-volatile data storage. Downloading meter stored data must be capable via an optical port. Recording capability of data storage with a minimum capability of 89 days of 15 minute, 2 channel interval data. The meter must be capable of providing at least 2 KYZ pulse outputs (dry contacts).
\n\tMeter must have an optical port on front of meter. Optical device must be compatible with ANSI C12.18.
\n\tMeters must be 120-480 volts auto ranging.
\n\tPower Quality: sag/swell, individual, even, odd, total harmonics to the 31st and symmetrical components
\n\t9S, 35S, 36S socket and switchboard cases
\n\tTrue RMS 3-phase voltage, current, power and meets ANSI revenue metering standards including ANSI C12.20 0.2 and Class 2, 10, & 20.
\n\tThis notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract.
\n\nInterested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format. Also, provide company information and point of contract (name, title, email, phone, mailing address).
\n\nThe Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement.
\n
\nAny information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure.
\n
\nInterested parties shall submit information and specifications to Shae Ishimoto, Contract Specialist, via email at shae.n.ishimoto.civ@us.navy.mil. Interested parties responding to this announcement by 9 November, 2026 at 10:00 A.M. Hawaii Standard Time will be considered.