{"canonical":"https://abierto.us/opportunities/fa483024q0037","key":"FA483024Q0037","url":"https://abierto.us/opportunities/fa483024q0037","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","open":false,"response_deadline":"2024-09-18T17:00:00Z","first_posted":"2024-04-18","last_posted":"2024-09-12","department":"DEPT OF DEFENSE","subagency":"DEPT OF THE AIR FORCE","office":"FA4830 23 CONS CC","naics":"337127","psc":"6640","set_aside":"SBA","place_state":"GA","place_county":"13185","place_county_name":"Lowndes County","place_city":"1352556","place_city_name":"Moody AFB","winner":"A3 SYSTEMS CORPORATION","award_amount":"198802.50","publications":[{"notice_id":"106a0240aede4138a0e7e18e6379ff3a","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"r","base_type":"r","posted":"2024-04-18","posted_at":null,"due_at":"2024-04-23T18:00:00Z","due_date":"2024-04-23","cancelled":null,"archived":null,"archive_date":"2024-05-23","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/106a0240aede4138a0e7e18e6379ff3a/view","enriched":false,"history":[]},{"notice_id":"6b056367488543b9a7555adcac17c3a0","title":"Pneumatic Lifting Bags Moody AFB","solicitation_number":"FA483024Q0041","notice_type":"r","base_type":"r","posted":"2024-04-30","posted_at":null,"due_at":"2024-05-07T20:00:00Z","due_date":"2024-05-07","cancelled":null,"archived":null,"archive_date":"2024-06-07","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/6b056367488543b9a7555adcac17c3a0/view","enriched":false,"history":[]},{"notice_id":"41276c12593f47339e2fb0ad8d938a6b","title":"Pneumatic Lifting Bags Moody AFB","solicitation_number":"FA483024Q0041","notice_type":"k","base_type":"r","posted":"2024-06-14","posted_at":null,"due_at":"2024-06-18T17:00:00Z","due_date":"2024-06-18","cancelled":null,"archived":null,"archive_date":"2024-07-18","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/41276c12593f47339e2fb0ad8d938a6b/view","enriched":false,"history":[]},{"notice_id":"f21077fe9089455fa967dc0ae06f5729","title":"Pneumatic Lifting Bags Moody AFB","solicitation_number":"FA483024Q0037","notice_type":"a","base_type":"k","posted":"2024-06-27","posted_at":null,"due_at":null,"due_date":null,"cancelled":null,"archived":null,"archive_date":"2024-07-24","award_number":"FA483024P0037","awardee_name":"A3 SYSTEMS CORPORATION Chester","amount":"198802.50","link_sam":"https://sam.gov/workspace/contract/opp/f21077fe9089455fa967dc0ae06f5729/view","enriched":false,"history":[]},{"notice_id":"e48104a2c38f44e8b48fa058a0553fd1","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","base_type":"r","posted":"2024-07-08","posted_at":null,"due_at":"2024-07-31T17:00:00Z","due_date":"2024-07-31","cancelled":null,"archived":null,"archive_date":"2024-09-01","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/e48104a2c38f44e8b48fa058a0553fd1/view","enriched":false,"history":[]},{"notice_id":"72b4d8da478f4f208618767c793d34da","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","base_type":"k","posted":"2024-07-29","posted_at":null,"due_at":"2024-08-01T17:00:00Z","due_date":"2024-08-01","cancelled":null,"archived":null,"archive_date":"2024-09-01","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/72b4d8da478f4f208618767c793d34da/view","enriched":false,"history":[]},{"notice_id":"76701bd6fbdb4765ba4bf032ab885803","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","base_type":"k","posted":"2024-09-10","posted_at":null,"due_at":"2024-09-13T17:00:00Z","due_date":"2024-09-13","cancelled":null,"archived":null,"archive_date":"2024-10-13","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/76701bd6fbdb4765ba4bf032ab885803/view","enriched":false,"history":[]},{"notice_id":"8dc8e744b1fb4ef2a3df093f9fbcd031","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","base_type":"k","posted":"2024-09-10","posted_at":null,"due_at":"2024-09-13T17:00:00Z","due_date":"2024-09-13","cancelled":null,"archived":null,"archive_date":"2024-10-13","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/8dc8e744b1fb4ef2a3df093f9fbcd031/view","enriched":false,"history":[]},{"notice_id":"4bfbd877a9bf437eb8e30a1cae565ee2","title":"PMEL Workbenches","solicitation_number":"FA483024Q0037","notice_type":"k","base_type":"k","posted":"2024-09-12","posted_at":null,"due_at":"2024-09-18T17:00:00Z","due_date":"2024-09-18","cancelled":null,"archived":null,"archive_date":"2024-10-18","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/4bfbd877a9bf437eb8e30a1cae565ee2/view","enriched":false,"history":[]}],"latest_notice_id":"4bfbd877a9bf437eb8e30a1cae565ee2","first_type":"r","notices":[{"dates":{"posted":"2024-04-18","response_deadline":{"raw":"2024-04-23T14:00:00-04:00","utc":"2024-04-23T18:00:00Z","date":"2024-04-23","time":"14:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/106a0240aede4138a0e7e18e6379ff3a/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-05-23","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2294603947"}],"base_type":{"code":"r","label":"Sources Sought"},"notice_id":"106a0240aede4138a0e7e18e6379ff3a","provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"30b0f8865630df4f7faafaf602f7bc997bc3e082f2eba9c761a418eb1440e3ea","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"Need for Precision Measuring Laboratory Equipment (PMEL) Workbenches and Roller Carts The purpose of this post is seeking sources for market research purposes. Please submit all information and questions to cloud.wharton@us.af.mil. All workbenches shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and non conductive. The measurements listed below are not exact, we are looking for something similar to the current equipment with some modifications. See attached document for reference to what is needing replaced. Electrical Workbench with Riser and Shelf (6ea) Dimension: 72\"x36\"x34\"; Bench Adjustable Height on demand Range: 29\"-40\"; 8ea electrical receptacles; Weight Capacity 130lb Riser Dimensions: 72\"x19\"x18\"; 16ea electrical receptacles; Weight Capacity 75lb Shelf above Riser; Dimensions 72\"x15\"x10\" Side by Side Drawers (2ea); Dimensions: 24\"x34\"x3\"; customizable bins Electrical Workbench with Riser (4ea) Dimension: 72\"x36\"x34\"; 8ea electrical receptacles; Weight Capacity 130lb Riser Dimensions: 72\"x19\"x18\"; 16ea electrical receptacles; Weight Capacity 75lb Side by Side Drawers (2ea); Dimensions: 24\"x34\"x3\"; customizable bins Electrical Workbench with Riser (6ea) Dimension: 96\"x36\"x34\"; 8ea electrical receptacles; Weight Capacity 130lb Riser Dimensions: 96\"x19\"x18\"; 16ea electrical receptacles; Weight Capacity 75lb Side by Side Drawers (2ea); Dimensions: 24\"x34\"x3\"; customizable bins Electrical Workbench (6ea) Dimension: 72\"x36\"x34\"; Bench Adjustable Height on demand Range: 29\"-40\"; 12ea electrical receptacles front/back; Weight Capacity 130lb 5ea Drawer Cabinet; Various size drawers with customizable bins Electrical Workbench (3ea) Dimension: 96\"x36\"x34\"; Bench Adjustable Height on demand Range: 29\"-40\"; 12ea electrical receptacles front/back; Weight Capacity 130lb 2ea 5 Drawer Cabinet; Various size drawers with customizable bins Butcher Block Workbench (1ea) Dimension: 72\"x36\"x34\"; 12ea electrical receptacles front/back; Weight Capacity 130lb 5ea Drawer Cabinet; Various size drawers with customizable bins Butcher Block Workbench (1ea) Dimension: 96\"x36\"x34\"; 12ea electrical receptacles front/back; Weight Capacity 130lb 2 ea 5 Drawer Cabinet; Various size drawers with customizable bins Electrical Split Top Workbench (3ea) Dimension: 72\"x36\"x34\"; 12ea electrical receptacles front/back; Top rises on demand 18\"; Weight Capacity 50lb 5ea Drawer Cabinet; Various size drawers with customizable bins Roll Around Equipment Stand (16ea) Dimension: 20\"x24\"x30\"; Top shelf angle adjustable 33; 2ea Drawer with customizable bins; Bottom Shelf open; Adjustable securing strap for top shelf; omni-directional wheel casters","origin":"extract"},"notice_type":{"code":"r","label":"Sources Sought"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"},{"dates":{"posted":"2024-04-30","response_deadline":{"raw":"2024-05-07T16:00:00-04:00","utc":"2024-05-07T20:00:00Z","date":"2024-05-07","time":"16:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/6b056367488543b9a7555adcac17c3a0/view"},"naics":{"codes":["336413"],"primary":"336413"},"title":"Pneumatic Lifting Bags Moody AFB","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-06-07","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2294603947"}],"base_type":{"code":"r","label":"Sources Sought"},"notice_id":"6b056367488543b9a7555adcac17c3a0","provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"b93dacfc002d262284d54cddc5797dbaf7f2172a4c7b4f52acc1bb2342d179de","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"The purpose of this post is seeking sources for market research purposes. Moody AFB is searching for capable vendors able to fulfill the requirement of Crash Damaged and Disabled Aircraft Recovery (CDDAR) pneumatic aircraft lifting bags. Requirements for the lift bags are as follows: Must be able to attach to Control Console Part Number: 9316-010 as this is the current console being used at Moody AFB. Must have existing Technical Data with operating instructions approved by the United States Air Force. Must be able to lift a minimum of 45,000 pounds for aircraft recovery. Please submit all information and questions to cloud.wharton@us.af.mil.","origin":"extract"},"notice_type":{"code":"r","label":"Sources Sought"},"schema_version":1,"solicitation_number":"FA483024Q0041","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"4920"},{"dates":{"posted":"2024-06-14","response_deadline":{"raw":"2024-06-18T13:00:00-04:00","utc":"2024-06-18T17:00:00Z","date":"2024-06-18","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/41276c12593f47339e2fb0ad8d938a6b/view"},"naics":{"codes":["336413"],"primary":"336413"},"title":"Pneumatic Lifting Bags Moody AFB","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-07-18","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"r","label":"Sources Sought"},"notice_id":"41276c12593f47339e2fb0ad8d938a6b","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"554640c4b7d6e0fc08f35a7b76628e65904da43e10cc64a3ef5567825542e593","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"GENERAL STATEMENT: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. Requirement: Moody AFB CDDAR Program is in need of C-130 crashed aircraft recovery items via pneumatic lifting bags, to recover and lift aircraft when damaged or crashed. Pneumatic lifting bag kits are required to lift a C-130 with a minimum of 4 lifting positions (right wing, left wing, forward fuselage and aft fuselage). Due to all possible terrain conditions, separated modular lift bag(s) must be deflatable to minuscule sizes and able slide under aircraft at limiting heights. Excluding the 1 kit already possessed, we are in need of the other 3 kits to perform these lifting functions. The aircraft recovery lift weight to perform these functions is 120,000 pounds. Moody AFB is already in possession of these items: -1 kit consisting of modular type 26 ton pneumatic lifting bag, hoses for current bag, 4 protective pads for 2 above and 2 below pneumatic lifting bag, and repair kit consisting of materials necessary to patch damaged areas of the pneumatic modules. -All Control Consoles P/N 9316-010 required. -All Cribbing. Each Kit must include: -1 pneumatic lifting bag -All required hoses to match number of lifting bag connections (not to exceed 15 per bag) -4 protective pads, for 2 above and 2 below the lift bags -1 repair kit consisting of materials necessary to patch damaged areas of the pneumatic modules. Items requirements: -Pneumatic Lifting Bag must have 15 or less hose connections -Pneumatic Lifting Bag must be modular in build so they can be stacked or separated. -Pneumatic Lifting Bag (individual or stacked) must lift minimum of 24 inches and maximum 120 inches -All hoses must have the capability of connecting the Pneumatic Lifting Bag to Control Console P/N 9316-010. -[\"Part #: FM5305 NSN: 4730-00-404-7179 Title/Name: FM5305 by ZSi-Foster | Quick Disconnect | 1-Way Automatic Socket | 1/2\" MPT | Brass\"] is the quick disconnect that is required to attach to Control Console P/N 9316-010. An alternate quick disconnect is acceptable as long as it connects to console seamlessly. -All hoses must be minimum of 50 feet with quick disconnects on each end. -Protective pads must be of material that protects against sharp or protruding environments. -Pneumatic lifting bags must contain relief valves that are actuated to vent excess pressure to the atmosphere if pressure rises above 10 psi. All vendors must provide a capability statement with item specifications included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0041","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"1670"},{"award":{"date":"2024-06-24","amount":"198802.50","number":"FA483024P0037","awardee":{"raw":"A3 SYSTEMS CORPORATION Chester VA 23836 USA","name":"A3 SYSTEMS CORPORATION Chester","location":{"zip":"23836","state":{"code":"VA"},"country":{"code":"USA"}}}},"dates":{"posted":"2024-06-27","award_date":"2024-06-24"},"links":{"sam":"https://sam.gov/workspace/contract/opp/f21077fe9089455fa967dc0ae06f5729/view"},"naics":{"codes":["336413"],"primary":"336413"},"title":"Pneumatic Lifting Bags Moody AFB","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-07-24","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"notice_id":"f21077fe9089455fa967dc0ae06f5729","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"7812b58fa31527dee5b35cef2fa71deb6b757783392da2429d83d7b817a80a1a","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"notice_type":{"code":"a","label":"Award Notice"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"4920"},{"dates":{"posted":"2024-07-08","response_deadline":{"raw":"2024-07-31T13:00:00-04:00","utc":"2024-07-31T17:00:00Z","date":"2024-07-31","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/e48104a2c38f44e8b48fa058a0553fd1/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-09-01","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"r","label":"Sources Sought"},"notice_id":"e48104a2c38f44e8b48fa058a0553fd1","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"a4d71456765bf43fa6552cee25a86b1bd766927c34881b55c59d21d5b038001a","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.9 Produce sixteen (16) each roll around equipment stand. Flat with no fore and aft lip. 21in ±1 length by 24in ±1 width by 30in height with the workbench shelf adjustable to 33-degree pitch up facing forward. Two (2) each adjustable securing straps. One (1) or two (2) drawers would be acceptable. Four (4) each omni-directional wheel casters with lockable brakes. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"},{"dates":{"posted":"2024-07-29","response_deadline":{"raw":"2024-08-01T13:00:00-04:00","utc":"2024-08-01T17:00:00Z","date":"2024-08-01","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/72b4d8da478f4f208618767c793d34da/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-09-01","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"notice_id":"72b4d8da478f4f208618767c793d34da","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"eff01b08fa6ef9f024ccb9ab75b1685f0f806780e2d1676fbad8bd468d89addc","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"***Amendment 0001: The purpose of this amendment is to extend the offer due date from Wednesday 31 July 2024 to Thursday 1 August 2024.*** General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.9 Produce sixteen (16) each roll around equipment stand. Flat with no fore and aft lip. 21in ±1 length by 24in ±1 width by 30in height with the workbench shelf adjustable to 33-degree pitch up facing forward. Two (2) each adjustable securing straps. One (1) or two (2) drawers would be acceptable. Four (4) each omni-directional wheel casters with lockable brakes. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"},{"dates":{"posted":"2024-09-10","response_deadline":{"raw":"2024-09-13T13:00:00-04:00","utc":"2024-09-13T17:00:00Z","date":"2024-09-13","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/76701bd6fbdb4765ba4bf032ab885803/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-10-13","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"notice_id":"76701bd6fbdb4765ba4bf032ab885803","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"1facee4665a00f602c8d8e82a1b2e12a9d72ffb928f185005ca3c507c26639a5","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"***Amendment 0002: The purpose of this amendment is to: 1. Extend the offer due date from Thursday 1 August 2024 to 13 September 2024. 2. Remove item 3.9 from the Statement of Work (rolling carts). 3. Rephrase the statement in the Statement of Work from \"The old furniture will be removed from the laboratory.\" to \"The old furniture will be removed from the laboratory and placed in the parking lot.\" *** ***Amendment 0001: The purpose of this amendment is to extend the offer due date from Wednesday 31 July 2024 to Thursday 1 August 2024.*** General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"},{"dates":{"posted":"2024-09-10","response_deadline":{"raw":"2024-09-13T13:00:00-04:00","utc":"2024-09-13T17:00:00Z","date":"2024-09-13","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/8dc8e744b1fb4ef2a3df093f9fbcd031/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-10-13","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"notice_id":"8dc8e744b1fb4ef2a3df093f9fbcd031","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"080c85db8ad270e0479547fa64122d669db1893bd93e6c6fb3f10c26d815e8ef","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"***Amendment 0001: The purpose of this amendment is to extend the offer due date from Wednesday 31 July 2024 to Thursday 1 August 2024.*** General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.9 Produce sixteen (16) each roll around equipment stand. Flat with no fore and aft lip. 21in ±1 length by 24in ±1 width by 30in height with the workbench shelf adjustable to 33-degree pitch up facing forward. Two (2) each adjustable securing straps. One (1) or two (2) drawers would be acceptable. Four (4) each omni-directional wheel casters with lockable brakes. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"},{"dates":{"posted":"2024-09-12","response_deadline":{"raw":"2024-09-18T13:00:00-04:00","utc":"2024-09-18T17:00:00Z","date":"2024-09-18","time":"13:00:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/4bfbd877a9bf437eb8e30a1cae565ee2/view"},"naics":{"codes":["337127"],"primary":"337127"},"title":"PMEL Workbenches","agency":{"office":{"code":"FA4830","name":"FA4830 23 CONS CC"},"subtier":{"code":"5700","name":"DEPT OF THE AIR FORCE"},"department":{"code":"057","name":"DEPT OF DEFENSE"},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-10-18","archive_type":"auto_custom"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"base_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"notice_id":"4bfbd877a9bf437eb8e30a1cae565ee2","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"8486a37bee3df4213f95396dcb9eaac1a7f35432499a3c6ea41d3eeaffff891d","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"***Amendment 0003: The purpose of this amendment is to extend the offer due date from Friday 13 September 2024 to Wednesday 18 September 2024.*** ***Amendment 0002: The purpose of this amendment is to: 1. Extend the offer due date from Thursday 1 August 2024 to 13 September 2024. 2. Remove item 3.9 from the Statement of Work (rolling carts). 3. Rephrase the statement in the Statement of Work from \"The old furniture will be removed from the laboratory.\" to \"The old furniture will be removed from the laboratory and placed in the parking lot.\" *** ***Amendment 0001: The purpose of this amendment is to extend the offer due date from Wednesday 31 July 2024 to Thursday 1 August 2024.*** General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","origin":"extract"},"notice_type":{"code":"k","label":"Combined Synopsis/Solicitation"},"schema_version":1,"solicitation_number":"FA483024Q0037","place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"product_service_code":"6640"}],"due_at":"2024-09-18T17:00:00Z","due_date":"2024-09-18","closes_at":"2024-09-18T17:00:00Z","awardable":true,"dept_key":"d-057","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA4830","office_name":"FA4830 23 CONS CC","state":"GA","county":"13185","county_name":"Lowndes County","city":"1352556","city_name":"Moody AFB","country":"USA","winner_key":"EHMWBZNJ9H33","amount":"198802.50","linked_awards":3,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z","principal_notice_id":"4bfbd877a9bf437eb8e30a1cae565ee2","description":{"text":"***Amendment 0003: The purpose of this amendment is to extend the offer due date from Friday 13 September 2024 to Wednesday 18 September 2024.*** ***Amendment 0002: The purpose of this amendment is to: 1. Extend the offer due date from Thursday 1 August 2024 to 13 September 2024. 2. Remove item 3.9 from the Statement of Work (rolling carts). 3. Rephrase the statement in the Statement of Work from \"The old furniture will be removed from the laboratory.\" to \"The old furniture will be removed from the laboratory and placed in the parking lot.\" *** ***Amendment 0001: The purpose of this amendment is to extend the offer due date from Wednesday 31 July 2024 to Thursday 1 August 2024.*** General Statement: This is a combined synopsis/solicitation for commercial items issued by the 23d Contracting Squadron, Moody AFB, Georgia. This announcement constitutes the only solicitation being issued for the requirement described herein. The 23d Maintenance Squadron (MXS) requires multiple size workbenches and roll around equipment stands to the specified requirements listed below along with their installation. All workbenches and roll around equipment stands shall be of a design that prevents accumulation of dust and facilitates cleaning. Working surfaces shall be resistant to heat, chemicals, chipping, or other deterioration and electrically nonconductive. Vendor shall be required to provide all necessary equipment, tools, and materials needed to build (if not previously built) and place all workbenches and roll around equipment stands. All items must be fully assembled when placed in final position within the lab. Vendor shall perform function check of each workbench and roll around equipment stand. Vendor shall disassemble and remove old workbenches and roll around carts identified to be removed and place them in the parking lot outside Building 552, at location appointed by customer. Vendor shall complete work in three (3) rooms within building 552. Vendor shall be responsible for daily clean up and proper disposal of refuse and materials. Vendor shall be working in an environmentally controlled laboratory and must work in a fashion to maintain the environment to include but not limited to keeping the doors closed. Vendor shall limit bringing dirt into the lab and shall not be allowed to bring drinks into the lab. All workbenches must be built to requirements found inside Statement of Work. 3.1 Produce six (6) each electrical workbench with riser and top shelf. 72in ±2 length, with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.2 Produce three (3) each electrical workbench with riser. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3a Produce one (1) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.3b Produce four (4) each electrical workbench with riser. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.4 Produce seven (7) each electrical workbench. 72in ±2 length. With an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.5 Produce four (4) each electrical workbench. 90in ±2 length. with an adjustable height, on demand, of 29in to 40in. Two (2) side by side and centered drawers. 3.6 Produce two (2) each butcher block workbench. 72in ±2 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the right side. 3.7 Produce one (1) each butcher block workbench. 90in ±6 length. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. 3.8 Produce two (2) each electrical split top workbench. Two (2) flush side by side tops a minimum of 36in ±2 length. Top should rise independently, on demand, a minimum of 18in height. A five (5) drawer cabinet placed below the workbench from underside of bench to the floor, shall be placed on the left side. A site visit will be conducted on Wednesday, July 24th at 1:00 PM EST at Building 552 on Moody AFB. Respondents interested in the site visit shall respond no later than Tuesday, July 23rd at 10:00 AM EST to SrA Cloud I. Wharton at cloud.wharton@us.af.mil. All vendors must provide a capability statement with item specifications and measurements included for technical review.","html":null,"origin":"extract"},"contacts":[{"name":"Cloud Wharton","role":"primary","email":"cloud.wharton@us.af.mil","phone":"2292574776"},{"name":"Samuel D. Garfunkel","role":"secondary","email":"samuel.garfunkel.1@us.af.mil","phone":"2292573947"}],"place_of_performance":{"zip":"31699","city":{"name":"Moody AFB"},"state":{"code":"GA"},"country":{"code":"USA"}},"office_address":{"zip":"31699-1700","city":"MOODY AFB","state":"GA","country":"USA"},"naics_codes":["337127"],"award":null,"attachments":[],"awards":[{"award_key":"CONT_AWD_FA483024P0037_9700_-NONE-_-NONE-","permalink":"https://www.usaspending.gov/award/CONT_AWD_FA483024P0037_9700_-NONE-_-NONE-/","piid":"FA483024P0037","parent_piid":null,"award_type":"PURCHASE ORDER","vendor_key":"EHMWBZNJ9H33","recipient_name":"A3 SYSTEMS CORPORATION","recipient_uei":"EHMWBZNJ9H33","recipient_cage":"7D4R3","recipient_city":"CHESTER","recipient_state":"VA","sub_name":"Department of the Air Force","office_name":"FA4830 23 CONS CC","office_key":"o-FA4830","first_action_date":"2024-06-24","last_action_date":"2024-06-24","actions":1,"obligated":"198802.50","current_total_value":"198802.50","potential_total_value":"198802.50","naics":"336413","psc":"4920","extent_competed":"COMPETED UNDER SAP","set_aside":"SMALL BUSINESS SET ASIDE - TOTAL","offers_received":4,"description":"PNEUMATIC LIFTING BAGS","method":"piid","confidence":"high","evidence":["award number FA483024P0037 equals the contract number","same awarding office FA4830"],"opportunity_key":null,"opportunity_title":null}],"related":[{"key":"SSFA483026Q0075","latest_notice_id":"69f613fb66f346309da52bb94acf11ef","title":"820 COS Drones","solicitation_number":"SSFA483026Q0075","notice_type":"r","first_type":"r","first_posted":"2026-09-15","last_posted":"2026-09-15","notices":1,"due_at":"2026-09-18T14:00:00Z","due_date":"2026-09-18","closes_at":"2026-09-18T14:00:00Z","awardable":true,"open":true,"dept_key":"d-057","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA4830","office_name":"FA4830 23 CONS CC","naics":"336411","psc":"1550","set_aside":"SBA","state":"GA","county":"13185","county_name":"Lowndes County","city":"1352556","city_name":"Moody AFB","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z"},{"key":"FA483026Q0074","latest_notice_id":"8ae964e8575d44ae8448f3daa3c538f1","title":"Vinyl Printer and Cutter","solicitation_number":"FA483026Q0074","notice_type":"o","first_type":"o","first_posted":"2026-09-14","last_posted":"2026-09-15","notices":2,"due_at":"2026-09-18T16:00:00Z","due_date":"2026-09-18","closes_at":"2026-09-18T16:00:00Z","awardable":true,"open":true,"dept_key":"d-057","dept_name":"DEPT OF DEFENSE","sub_key":"s-5700","sub_name":"DEPT OF THE AIR FORCE","office_key":"o-FA4830","office_name":"FA4830 23 CONS CC","naics":"334118","psc":"3610","set_aside":"SBA","state":"GA","county":"13185","county_name":"Lowndes County","city":"1352556","city_name":"Moody AFB","country":"USA","winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z"}]}