# Engine Water Sample Testing for MH-65E aircraft

Canonical: https://abierto.us/opportunities/70z03826qb0000011

- Solicitation number: 70Z03826QB0000011
- Notice type: Award notice (first published as combined synopsis and solicitation)
- Status: Awarded to Federon Procurement Solutions for $97,347.81
- Department: Department of Homeland Security
- Agency: US Coast Guard
- Contracting office: Aviation Logistics Center (Alc) (70Z038)
- NAICS: 541990 All Other Professional, Scientific, and Technical Services
- Product or service code: H999 Other Quality Control, Testing and Inspection Services: Miscellaneous
- First posted: February 10, 2026
- Last posted: March 25, 2026
- SAM.gov: https://sam.gov/workspace/contract/opp/a0b5e6994bb849a2a819ddef8d6f617f/view

## Description

The Purpose of Amendment 5 is to add a clause to the terms and conditions; and to respond to a vendor question.

**Question:** Our laboratory is not able to perform ash content analysis on solid samples. However, based on the responses provided by USACE to vendor questions in the solicitation, it appears that chloride, sulfate, and hardness analyses may be performed in addition to the other originally requested methods. Could you please confirm whether this substitution would be acceptable, or if you would prefer that we no-bid this specific method?

**Answer:** Ash testing is a required part of the USCG test procedures as outlined in the Statement of Work, therefore inability to test for ash would render any submitted quote technically unacceptable.

The purpose of Amendment 4 is to add additional information to the Statement of Work.

The purpose of Amendment 3 is to respond to vendor questions.

**Question:** The Statement of Work lists the required parameters but does not specify the analytical methods to be used. Could you please clarify what specific analyses or method standards are required for this project?

**Answer:** There are no specific ways of testing or specific ISO reference for which the water samples must be tested with. They can have the water analyzed by an accredited laboratory against the water-quality requirements listed in our Maintenance Manual, using standard ISO / ASTM methods for each of the following parameters: appearance, chloride, sulphate, sodium, hardness, conductivity at 25 °C, pH, and dry residue (total dissolved solids). SAFRAN HE does not specify a precise test method, as long as parameters listed are measured.

**Question:** We would like to confirm whether the Government will be responsible for collecting all water samples, with the contractor responsible only for providing sample containers, outbound shipping of kits, receiving returned samples, and performing the laboratory analysis.

**Answer:** Yes, the government is responsible for all water sample collecting and the contractor is responsible for providing sample containers, outbound shipping of kits, receiving samples, performing laboratory analysis, providing documentation of specific test results, and sending out notifications.

**Question:**

**Aspect / Appearance Testing Requirement:** The Statement of Work requires reporting of “aspect” for water samples. The partners have indicated they do not perform a specific aspect/appearance analysis but can provide True Color testing (Standard Method SM 2120) as an alternative. Please confirm whether True Color testing is acceptable as a substitute for the aspect requirement.

**Answer:** The aspect / appearance test is solely a visual inspection of the appearance of the water sample ‘as is.’ No prior processing is required.

**Question:**

**Ash Testing Method:** The laboratory has advised that ash testing is typically performed on solid samples. They proposed filtering solids present in the water sample and determining ash content from the filtered material. Please confirm whether this methodology would be acceptable under the SOW requirements.

**Answer:** There are no specific ways of testing or specific ISO reference for which the water samples must be tested with. They can have the water analyzed by an accredited laboratory against the water-quality requirements listed in our Maintenance Manual, using standard ISO / ASTM methods for each of the following parameters: appearance, chloride, sulphate, sodium, hardness, conductivity at 25 °C, pH, and dry residue (total dissolved solids). SAFRAN HE does not specify a precise test method, as long as parameters listed are measured.

**Question:**

**Laboratory Subcontracting / Third-Party Testing:** Please confirm whether subcontracting laboratory testing services is permitted under this requirement, and if so, any specific FAR flow-down provisions, approval requirements, or limitations applicable to third-party laboratories.

**Answer:** Subcontracting is permitted and all applicable clauses in the terms and conditions flow down.

**Question:**

**Estimated Sample Volume / Frequency:** To ensure accurate pricing and logistics planning, could you please provide an estimated annual sample quantity or expected testing frequency across USCG units and cutters?

**Answer:** This requirement is estimated to be approximately 100 annually. The frequency is expected to be sporadic as each air-station and cutter are on their own schedule.

**Question:**

**Reporting and Testing Method Standards:** Please confirm if specific EPA, ASTM, or Standard Methods must be used for the required parameters (pH, conductivity, dissolved solids, ash, and aspect), or if equivalent validated methods are acceptable.

**Answer:** There are no specific ways of testing or specific ISO reference for which the water samples must be tested with. They can have the water analyzed by an accredited laboratory against the water-quality requirements listed in our Maintenance Manual, using standard ISO / ASTM methods for each of the following parameters: appearance, chloride, sulphate, sodium, hardness, conductivity at 25 °C, pH, and dry residue (total dissolved solids). SAFRAN HE does not specify a precise test method, as long as parameters listed are measured.

The purpose of Amendment 2 is to extend the closing date to March 17, 2026, at 1:30 pm EST to allow for research for a question posed by a vendor.

The purpose of amendment 1 is to answer the following question.

**QUESTION:** We would like to know if this is a brand new contract OR if there is (was) an incumbent performing these services. If not brand new, could you please provide the current / previous contract number?

**ANSWER:** This requirement is a follow-on for contract 70Z03821DB2000010. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QB0000011 is issued as a request for quotation (RFQ).

This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO). The applicable North American Industry Classification Standard Code is 541990. The small business size standard is $19.5 million. This is an unrestricted solicitation. All responsible sources may submit a quotation which shall be considered by the agency.

The United States Coast Guard (USCG), Aviation Logistic Center (ALC), Elizabeth City, NC intends to award an Indefinite Delivery Requirements type contract on a full and open competitive basis for Engine Water Sample Testing for the MH-65E aircraft. This requirement will be procured via issuance of individually funded task orders.

The anticipated period of performance will be five (5) years total, consisting of one (1) year base period, and if exercised, four (4) one-year option periods, this contract shall not exceed five (5) years. See the following attachments titled: See attached documents titled: Attachment 1 - “Requirements - 70Z03826QB0000011”, Attachment 2 - “Statement of Work – 70Z03826QB0000011”, and Attachment 3 - “Terms and Conditions – 70Z03826QB0000011”.

Closing date and time for receipt of offers is 17 March 2026 at 1:30 pm EST. Quotes and questions shall be submitted by email to Alex-Marie.B.Midgett@uscg.mil. Please indicate solicitation 70Z03826QB0000011 in the subject line.

## Award on USAspending

- Recipient: Federon Procurement Solutions (UEI X17PAT4BEDJ8)
- Contract: 70Z03826DB0000016
- Obligated: $0.00
- Competition: Competed Under SAP, 7 offers received
- Link: award number 70Z03826DB0000016 equals the contract number; same awarding office 70Z038 (high confidence)
- Record: https://www.usaspending.gov/award/CONT_IDV_70Z03826DB0000016_7008/


## Publications

- February 10, 2026: Combined synopsis and solicitation, due February 24, 2026 at 1:30 PM EST. Notice 2b7dff2890de44beb6867205687e4879. https://sam.gov/workspace/contract/opp/2b7dff2890de44beb6867205687e4879/view
- February 11, 2026: Combined synopsis and solicitation, due February 24, 2026 at 1:30 PM EST. Notice 98e14b90b760407893b2d2686c0c4219. https://sam.gov/workspace/contract/opp/98e14b90b760407893b2d2686c0c4219/view
- February 19, 2026: Combined synopsis and solicitation, due March 17, 2026 at 1:30 PM EDT. Notice e641207897f24439b87eec397c148c67. https://sam.gov/workspace/contract/opp/e641207897f24439b87eec397c148c67/view
- February 26, 2026: Combined synopsis and solicitation, due March 17, 2026 at 1:30 PM EDT. Notice b18e13b557c84c26ae2620b19b9ef7bd. https://sam.gov/workspace/contract/opp/b18e13b557c84c26ae2620b19b9ef7bd/view
- March 3, 2026: Combined synopsis and solicitation, due March 17, 2026 at 1:30 PM EDT. Notice b86338a1f4bb49fbb893711e285f0118. https://sam.gov/workspace/contract/opp/b86338a1f4bb49fbb893711e285f0118/view
- March 13, 2026: Combined synopsis and solicitation, due March 17, 2026 at 1:30 PM EDT. Notice 2da5d5cd435547e6a611378d28aaa950. https://sam.gov/workspace/contract/opp/2da5d5cd435547e6a611378d28aaa950/view
- March 25, 2026: Award notice. Notice a0b5e6994bb849a2a819ddef8d6f617f. https://sam.gov/workspace/contract/opp/a0b5e6994bb849a2a819ddef8d6f617f/view

## Points of contact

- Alex-Marie Midgett, Alex-Marie.B.Midgett@uscg.mil, 5716107299
- Raymond V. Marler, raymond.v.marler@uscg.mil

---
Source: SAM.gov Contract Opportunities bulk extract and USAspending.gov award data. Confirm deadlines on SAM.gov before responding. Cite https://abierto.us/opportunities/70z03826qb0000011.
