{"canonical":"https://abierto.us/opportunities/70z03824ie0000003","key":"70Z03824IE0000003","url":"https://abierto.us/opportunities/70z03824ie0000003","title":"Aviation Radiography Exposure Room (Vault) Industry Day","solicitation_number":"70Z03824IE0000003","notice_type":"s","open":false,"response_deadline":"2024-01-23T19:00:00Z","first_posted":"2024-01-05","last_posted":"2024-05-14","department":"HOMELAND SECURITY, DEPARTMENT OF","subagency":"US COAST GUARD","office":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"541512","psc":"J016","set_aside":null,"place_state":"NC","place_county":"37139","place_county_name":"Pasquotank County","place_city":"3720580","place_city_name":"Elizabeth City","winner":null,"award_amount":null,"publications":[{"notice_id":"435b54234dc246c4baf03f08646c8196","title":"Plating and Metal Finishing Services","solicitation_number":"70Z03824IE0000003","notice_type":"r","base_type":"r","posted":"2024-01-05","posted_at":null,"due_at":"2024-01-23T19:00:00Z","due_date":"2024-01-23","cancelled":null,"archived":null,"archive_date":"2024-02-07","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/435b54234dc246c4baf03f08646c8196/view","enriched":false,"history":[]},{"notice_id":"d407d805cb064f328353ab85f5df3be4","title":"Aviation Radiography Exposure Room (Vault) Industry Day","solicitation_number":"70Z03824IE0000003","notice_type":"s","base_type":"s","posted":"2024-05-14","posted_at":null,"due_at":"2024-05-31T20:30:00Z","due_date":"2024-05-31","cancelled":null,"archived":null,"archive_date":"2024-06-15","award_number":null,"awardee_name":null,"amount":null,"link_sam":"https://sam.gov/workspace/contract/opp/d407d805cb064f328353ab85f5df3be4/view","enriched":false,"history":[]}],"latest_notice_id":"d407d805cb064f328353ab85f5df3be4","first_type":"r","notices":[{"dates":{"posted":"2024-01-05","response_deadline":{"raw":"2024-01-23T14:00:00-05:00","utc":"2024-01-23T19:00:00Z","date":"2024-01-23","time":"14:00:00","utc_offset_seconds":-18000}},"links":{"sam":"https://sam.gov/workspace/contract/opp/435b54234dc246c4baf03f08646c8196/view"},"naics":{"codes":["332813"],"primary":"332813"},"title":"Plating and Metal Finishing Services","agency":{"office":{"code":"70Z038","name":"AVIATION LOGISTICS CENTER (ALC)(00038)"},"subtier":{"code":"7008","name":"US COAST GUARD"},"department":{"code":"070","name":"HOMELAND SECURITY, DEPARTMENT OF"},"office_address":{"zip":"27909","city":"Elizabeth City","state":"NC","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-02-07","archive_type":"auto15"},"contacts":[{"name":"Rose Bateman","role":"primary","email":"rose.a.bateman@uscg.mil"}],"base_type":{"code":"r","label":"Sources Sought"},"notice_id":"435b54234dc246c4baf03f08646c8196","provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"d494338eb74572945b58f2e126f1cd69d1ee12b9693cf63cbfb069922dc3a7d1","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"This is a sources sought synopsis only, not a solicitation announcement and is issued solely for informational and planning purposes. This posting is not a Request for Proposals (RFP) or a Request for Quotations (RFQ), and it is not considered to be a commitment by the Government to award a contract nor is the Government responsible for any costs incurred in furnishing information provided under this sources sought. No basis for claim against the Government shall arise as a result from a response to this sources sought or Government use of any information provided. Further, the USCG is not at this time seeking proposals and will not accept unsolicited proposals. No proprietary, classified, confidential, or sensitive information should be included in your response to this sources sought. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Responses will assist the Government in determining the availability of potential solutions and commercial products in the market. At this time, no solicitation exists; therefore, do not request a copy of the solicitation. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. The USCG is looking for companies capable of providing Plating and Metal Finishing Services to include: Anodizing, includes types 1, 2, & 3 all classes, Copper Plating/Copper Flash Nickel Plating, Phosphate Coating, Zinc Plating, Cadmium Plating, Metal Stripping to Remove Cadmium, Silver Plating, Black Oxide Coating, Chemical Conversion Coating, Passivation, Baking Services, Etching Services, Bead Blasting Services and Powder Coating Services of non-Flight Safety Critical Aircraft Parts (FSCAP) used on multiple Government platforms as well as non-aircraft support equipment on a routine weekly and three (3) hour turnaround rush schedule. Specific processes and references are listed below. Anodizing, includes types 1, 2, & 3 and all classes IAW MIL-A-8625 Copper Plating/Copper Flash IAW SAE AMS-2418H Nickel Plating IAW AMS-2404 Phosphate Coating IAW MIL-P-16232 Zinc Plating IAW ASTM-B633 Cadmium Plating IAW SAE-AMS-QQ-P-416 Metal Stripping to Remove Cadmium IAW ALC IOD 7 Silver Plating IAW ASTM-B700 Black Oxide Coating IAW MIL-C-13924D Chemical Conversion Coating IAW MIL-C-5541F Passivation IAW ASTM A 967-96 Etching Services IAW ASTM E340-13. Powder Coating IAW MIL-PRF-24712B The proposed North American Industry Classification System (NAICS) code for the future acquisition is 332813, Electroplating, Plating, Polishing, Anodizing, and Coloring . The size of business pursuant to NAICS is 500 employees. Sources Sought Responses: Responses to this notice should include Company Name, Address, Telephone Number, Point of Contact (POC), and Cage Code. All Contractors, qualified to provide Plating and Metal Finishing Services, should submit a response presenting sufficient information to substantiate that: The Contractor has Plating and Metal Finishing Services that meets or exceeds specifications referenced above. Is the Contractor’s facility is located within a three (3) to four (4) hour driving distance from Elizabeth City, NC? Does the Contracting Company have a GSA schedule, if so what schedule number? Can the Contractor provide same day services (3-hour turnaround)? Provide any additional comments/information you may have regarding this sources sought notice. After the review of the responses to this sources sought announcement, and if the USCG still plans to proceed with the acquisition, a solicitation announcement will be published on the SAM.gov website. Responses to this sources sought synopsis are not adequate responses to any future announcement. All interested offerors will have to respond to the solicitation in addition to responding to this sources sought synopsis. Responses to this sources sought synopsis are NOT a request to be added to a prospective offerors list or to receive a copy of the solicitation. Closing date and time for receipt of response is 23 January 2024 at 2:00 pm ET. Telephone responses will not be accepted. Responses should be submitted to Rose.A.Bateman@uscg.mil. Please indicate 70Z03824IE0000003 in the subject line.","origin":"extract"},"notice_type":{"code":"r","label":"Sources Sought"},"schema_version":1,"solicitation_number":"70Z03824IE0000003","place_of_performance":{"zip":"27909","city":{"name":"Elizabeth City"},"state":{"code":"NC"},"country":{"code":"USA"}},"product_service_code":"J016"},{"dates":{"posted":"2024-05-14","response_deadline":{"raw":"2024-05-31T16:30:00-04:00","utc":"2024-05-31T20:30:00Z","date":"2024-05-31","time":"16:30:00","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/d407d805cb064f328353ab85f5df3be4/view"},"naics":{"codes":["541512"],"primary":"541512"},"title":"Aviation Radiography Exposure Room (Vault) Industry Day","agency":{"office":{"code":"70Z038","name":"AVIATION LOGISTICS CENTER (ALC)(00038)"},"subtier":{"code":"7008","name":"US COAST GUARD"},"department":{"code":"070","name":"HOMELAND SECURITY, DEPARTMENT OF"},"office_address":{"zip":"27909","city":"Elizabeth City","state":"NC","country":"USA"},"organization_type":"OFFICE"},"status":{"active":false,"archive_date":"2024-06-15","archive_type":"auto15"},"contacts":[{"name":"Jackson Perry","role":"primary","email":"Jackson.S.Perry@uscg.mil","phone":"2523127411"}],"base_type":{"code":"s","label":"Special Notice"},"notice_id":"d407d805cb064f328353ab85f5df3be4","provenance":{"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/Archived%20Data/FY2024_archived_opportunities.csv","etag":"\"d582488fe153a9f11bf629913d176ffc-137\"","fetched_at":"2026-09-16T19:07:39.720164Z","row_sha256":"8f0b4f9cab56791f1065838bbfb6e2d32942d256c3cb8afd393f1a0c7eeb276f","last_modified":"2026-09-13T14:47:40Z"},"updated_at":"2026-09-16T19:07:39.720164Z","first_seen_at":"2026-09-16T19:07:39.720164Z"},"description":{"text":"Event: Aviation Radiography Exposure Room (Vault) Industry Day. Sponsor: United States Coast Guard (USCG), Aviation Logistics Center (ALC), Industrial Operations Division (IOD). Background: IOD is conducting market research to replace the current X-ray radiography exposure room to be used with a Lorad LPX-160 X-ray tubehead and or portable Comet X-ray unit. X-ray radiography exposure room must comply with 21CFR1020.4 and NAVSEA S0420-AA-RAD-010 requirements. This industry day is to identify sources to procure and install a new X-ray radiography exposure room (vault) To facilitate the scope of the purchase and installation of an X-ray radiography exposure room, ALC will host an Industry Day on June 11, 2024. This event is part of ALC’s market research that will be used to identify potential candidates to accomplish event listed above. The location will be USCG, ALC, located at 1664 Weeksville Drive, Elizabeth City NC 27909. The Industry Day will consist of a review of the USCG’s minimum requirements and a tour of the facilities where the X-ray radiography exposure room will be installed. Questions shall be submitted after the event, in writing to the primary point of contact listed below by June 18, 2024. Only questions received in writing will be answered and posted to SAM.Gov. As part of the Industry Day, the USCG will be requesting a Rough Order of Magnitude (ROM) be submitted by all interested parties by June 18, 2024. ROM information provided by vendors will not be released to the public or any other vendors. This information is for market research purposes only. Vendors are requested to provide the following information in their ROM, along with expected lead time of equipment/parts and a proposed Period of Performance: Event - Provide a Rough Order of Magnitude (ROM) to ensure product meets necessary criteria. Requirements of the X-ray radiography exposure room may include, but are not limited to: -Exposure room must comply with all 21CFR1020.4 requirements. -The ceiling, all 4 walls to include door and floor shall be shielded for 160 kV, 5mA and be labeled as primary barriers. -Maximum permissible radiation leakage not to exceed 0.5 mr/hr. -Approximate Interior dimensions must be 8' wide x 8' deep x 10’ height (may be larger if exterior dimensions below are not exceeded). -Exterior dimensions not to exceed 9.5' wide x 9.5' deep x 12’ height. -Initial radiation surveys and room certification will be performed by the manufacturer/installer. -Panel construction should consist of steel/lead/steel layered configuration. -Must have a 1' wide leaded floor perimeter sill with a potential angle iron for shielding. -One powered sliding door shall be located on the front (east) wall with an approximate door opening size 3' (minimum) wide x 7-8' high. -The interior shall have an emergency mechanical release for use in the event of a power loss. -The exterior of the X-ray exposure room will have a control panel for door operation. -The powered door control power box must be between 42-46” floor height and be placed to be operated at South and East corner of exposure room. -The baffle box shall be at its highest practical level possible to keep cables high for the purpose to be placed across the top of the exposure room and proceed to RH side of door opening for attaching to the X-ray control panel on the East exterior door side wall. -There shall be an automatic vertical safety reverse direction switch bumper on end of door/frame in case of equipment or personnel in the path of door. Note: Absolutely NO trenching in the concrete. All tracks shall be bolted down. The wiring of the alarm/light system to the X-ray system will be supported by the USCG. -There shall be a lockable device to use a padlock on the exterior of the door to prevent access to unauthorized personnel. -There must be a universal interlock system in place in the X-ray exposure room compatible with the Lorad, Comet, or like X-ray systems. -Interlock systems shall be a wired in series with \"sliding blade\" interlock style switch and an emergency stop switch on interior and exterior of X-ray exposure room to interrupt X-ray operations in the event of an emergency. -A motorized (vertical) tube head lift assembly is required to be installed on the interior of the exposure room in the S/W corner with a universal cradle for Lorad, Comet, or like systems etc. -The vertical lift system shall be S/W vertically corner mounted not ceiling mounted to raise/lower rail (motorized). -The horizontal rail system on lift shall be adjustable to minimum of 2' - 8' in length to provide complete coverage of X-ray exposure room floor. -The tube lift arm and cradle shall be capable of universally pivoting and locking. -There shall be an electrical vertical pendant style control box to raise/lower the rail assembly. -The X-ray exposure room shall have one exterior junction box with a terminal block for interface of \"X-ray On\" light, rotating beacon, audible alarm, and door interlock switches. -There will be one circuit load center for wiring the entire system. -There shall be one interior \"X-ray on\" warning/strobe light with an audible alarm on the interior and exterior of the exposure room. -There shall be two LED work lights wired separately with independent light switch on exterior of X-ray exposure room to provide a bright work area. -One 115vac duplex outlet will be placed on both the interior and exterior of the Exposure Room. Location TBD at later date. -Requesting paint colors to be bright colored interior and Exterior royal blue unless there is a standardized color scheme that the company already has designated. Contractors must register to attend this event. Interested parties shall submit the attached registration form no later than May 31, 2024, at 4:00pm EST. Base access will not be granted without this information. Directions to USCG Base Elizabeth City can be found at http://www.uscg.mil/alc/directions. The applicable North American Industrial Classification Code (NAICS) 541512. Responses to attend this event are due no later than May 31, 2024 at 4:00pm EST and may be submitted via email to the primary POC Jackson Perry at Jackson.S.Perry@uscg.mil. Questions concerning this Industry Day notification may be directed to Jackson Perry at Jackson.S.Perry@uscg.mil. Respondents are advised that the USCG will not pay for any information or administrative cost incurred in response to this Industry Day notification including participation. Who Should Attend: Attendance is limited to companies with demonstrated expertise. Prior federal contracting experience is not required. Registration: Please limit the number of attendees from your company to two (2) people. There is no cost to attend this event. There will be no refreshments served at this event. Day of Event: Onsite registration will begin at 9:00am EST on June 11, 2024. Please allow 15 minutes for security screening required to enter USCG Base Elizabeth City. This event is open to U.S. citizens only. Government issued photo ID (i.e. driver's license) will be required for admittance. *** This is NOT a request for proposals or quotes and in no way obligates the Government to award any contract. After the review of ROM’s and if the USCG still plans to proceed with the acquisition, a solicitation announcement will be published on SAM.gov. Respondents are advised that the USCG will not pay for any information or administrative cost incurred in response to this Industry Day notification including participation. ***","origin":"extract"},"notice_type":{"code":"s","label":"Special Notice"},"schema_version":1,"solicitation_number":"70Z03824IE0000003","place_of_performance":{"zip":"27909","city":{"name":"Elizabeth City"},"state":{"code":"NC"},"country":{"code":"USA"}}}],"due_at":"2024-01-23T19:00:00Z","due_date":"2024-01-23","closes_at":"2024-01-23T19:00:00Z","awardable":false,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","state":"NC","county":"37139","county_name":"Pasquotank County","city":"3720580","city_name":"Elizabeth City","country":"USA","winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z","principal_notice_id":"d407d805cb064f328353ab85f5df3be4","description":{"text":"Event: Aviation Radiography Exposure Room (Vault) Industry Day. Sponsor: United States Coast Guard (USCG), Aviation Logistics Center (ALC), Industrial Operations Division (IOD). Background: IOD is conducting market research to replace the current X-ray radiography exposure room to be used with a Lorad LPX-160 X-ray tubehead and or portable Comet X-ray unit. X-ray radiography exposure room must comply with 21CFR1020.4 and NAVSEA S0420-AA-RAD-010 requirements. This industry day is to identify sources to procure and install a new X-ray radiography exposure room (vault) To facilitate the scope of the purchase and installation of an X-ray radiography exposure room, ALC will host an Industry Day on June 11, 2024. This event is part of ALC’s market research that will be used to identify potential candidates to accomplish event listed above. The location will be USCG, ALC, located at 1664 Weeksville Drive, Elizabeth City NC 27909. The Industry Day will consist of a review of the USCG’s minimum requirements and a tour of the facilities where the X-ray radiography exposure room will be installed. Questions shall be submitted after the event, in writing to the primary point of contact listed below by June 18, 2024. Only questions received in writing will be answered and posted to SAM.Gov. As part of the Industry Day, the USCG will be requesting a Rough Order of Magnitude (ROM) be submitted by all interested parties by June 18, 2024. ROM information provided by vendors will not be released to the public or any other vendors. This information is for market research purposes only. Vendors are requested to provide the following information in their ROM, along with expected lead time of equipment/parts and a proposed Period of Performance: Event - Provide a Rough Order of Magnitude (ROM) to ensure product meets necessary criteria. Requirements of the X-ray radiography exposure room may include, but are not limited to: -Exposure room must comply with all 21CFR1020.4 requirements. -The ceiling, all 4 walls to include door and floor shall be shielded for 160 kV, 5mA and be labeled as primary barriers. -Maximum permissible radiation leakage not to exceed 0.5 mr/hr. -Approximate Interior dimensions must be 8' wide x 8' deep x 10’ height (may be larger if exterior dimensions below are not exceeded). -Exterior dimensions not to exceed 9.5' wide x 9.5' deep x 12’ height. -Initial radiation surveys and room certification will be performed by the manufacturer/installer. -Panel construction should consist of steel/lead/steel layered configuration. -Must have a 1' wide leaded floor perimeter sill with a potential angle iron for shielding. -One powered sliding door shall be located on the front (east) wall with an approximate door opening size 3' (minimum) wide x 7-8' high. -The interior shall have an emergency mechanical release for use in the event of a power loss. -The exterior of the X-ray exposure room will have a control panel for door operation. -The powered door control power box must be between 42-46” floor height and be placed to be operated at South and East corner of exposure room. -The baffle box shall be at its highest practical level possible to keep cables high for the purpose to be placed across the top of the exposure room and proceed to RH side of door opening for attaching to the X-ray control panel on the East exterior door side wall. -There shall be an automatic vertical safety reverse direction switch bumper on end of door/frame in case of equipment or personnel in the path of door. Note: Absolutely NO trenching in the concrete. All tracks shall be bolted down. The wiring of the alarm/light system to the X-ray system will be supported by the USCG. -There shall be a lockable device to use a padlock on the exterior of the door to prevent access to unauthorized personnel. -There must be a universal interlock system in place in the X-ray exposure room compatible with the Lorad, Comet, or like X-ray systems. -Interlock systems shall be a wired in series with \"sliding blade\" interlock style switch and an emergency stop switch on interior and exterior of X-ray exposure room to interrupt X-ray operations in the event of an emergency. -A motorized (vertical) tube head lift assembly is required to be installed on the interior of the exposure room in the S/W corner with a universal cradle for Lorad, Comet, or like systems etc. -The vertical lift system shall be S/W vertically corner mounted not ceiling mounted to raise/lower rail (motorized). -The horizontal rail system on lift shall be adjustable to minimum of 2' - 8' in length to provide complete coverage of X-ray exposure room floor. -The tube lift arm and cradle shall be capable of universally pivoting and locking. -There shall be an electrical vertical pendant style control box to raise/lower the rail assembly. -The X-ray exposure room shall have one exterior junction box with a terminal block for interface of \"X-ray On\" light, rotating beacon, audible alarm, and door interlock switches. -There will be one circuit load center for wiring the entire system. -There shall be one interior \"X-ray on\" warning/strobe light with an audible alarm on the interior and exterior of the exposure room. -There shall be two LED work lights wired separately with independent light switch on exterior of X-ray exposure room to provide a bright work area. -One 115vac duplex outlet will be placed on both the interior and exterior of the Exposure Room. Location TBD at later date. -Requesting paint colors to be bright colored interior and Exterior royal blue unless there is a standardized color scheme that the company already has designated. Contractors must register to attend this event. Interested parties shall submit the attached registration form no later than May 31, 2024, at 4:00pm EST. Base access will not be granted without this information. Directions to USCG Base Elizabeth City can be found at http://www.uscg.mil/alc/directions. The applicable North American Industrial Classification Code (NAICS) 541512. Responses to attend this event are due no later than May 31, 2024 at 4:00pm EST and may be submitted via email to the primary POC Jackson Perry at Jackson.S.Perry@uscg.mil. Questions concerning this Industry Day notification may be directed to Jackson Perry at Jackson.S.Perry@uscg.mil. Respondents are advised that the USCG will not pay for any information or administrative cost incurred in response to this Industry Day notification including participation. Who Should Attend: Attendance is limited to companies with demonstrated expertise. Prior federal contracting experience is not required. Registration: Please limit the number of attendees from your company to two (2) people. There is no cost to attend this event. There will be no refreshments served at this event. Day of Event: Onsite registration will begin at 9:00am EST on June 11, 2024. Please allow 15 minutes for security screening required to enter USCG Base Elizabeth City. This event is open to U.S. citizens only. Government issued photo ID (i.e. driver's license) will be required for admittance. *** This is NOT a request for proposals or quotes and in no way obligates the Government to award any contract. After the review of ROM’s and if the USCG still plans to proceed with the acquisition, a solicitation announcement will be published on SAM.gov. Respondents are advised that the USCG will not pay for any information or administrative cost incurred in response to this Industry Day notification including participation. ***","html":null,"origin":"extract"},"contacts":[{"name":"Jackson Perry","role":"primary","email":"Jackson.S.Perry@uscg.mil","phone":"2523127411"}],"place_of_performance":{"zip":"27909","city":{"name":"Elizabeth City"},"state":{"code":"NC"},"country":{"code":"USA"}},"office_address":{"zip":"27909","city":"Elizabeth City","state":"NC","country":"USA"},"naics_codes":["541512"],"award":null,"attachments":[],"awards":[],"related":[{"key":"70Z03826QJ0000366","latest_notice_id":"cfbb3c27f99a47dda45b843e3e1dfc63","title":"Detector","solicitation_number":"70Z03826QJ0000366","notice_type":"k","first_type":"k","first_posted":"2026-09-11","last_posted":"2026-09-16","notices":3,"due_at":"2026-09-17T16:00:00Z","due_date":"2026-09-17","closes_at":"2026-09-17T16:00:00Z","awardable":true,"open":true,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"336413","psc":"6685","set_aside":null,"state":null,"county":null,"county_name":null,"city":null,"city_name":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-17T06:28:38.602097Z"},{"key":"70Z03826QB0000183","latest_notice_id":"d61e143ac1a849fd9e44a466c1c4a860","title":"MH-65 Swivel Ring Assembly","solicitation_number":"70Z03826QB0000183","notice_type":"k","first_type":"k","first_posted":"2026-08-03","last_posted":"2026-09-16","notices":5,"due_at":"2026-09-17T18:00:00Z","due_date":"2026-09-17","closes_at":"2026-09-17T18:00:00Z","awardable":true,"open":true,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"336413","psc":"1560","set_aside":null,"state":null,"county":null,"county_name":null,"city":null,"city_name":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-17T06:28:38.602097Z"},{"key":"70Z03826QJ0000364","latest_notice_id":"05b551344243481e8e62dd2d1ad08a91","title":"Overhaul Signal Conditioner","solicitation_number":"70Z03826QJ0000364","notice_type":"k","first_type":"k","first_posted":"2026-09-11","last_posted":"2026-09-15","notices":2,"due_at":"2026-09-18T18:00:00Z","due_date":"2026-09-18","closes_at":"2026-09-18T18:00:00Z","awardable":true,"open":true,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"336413","psc":"6350","set_aside":null,"state":null,"county":null,"county_name":null,"city":null,"city_name":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z"},{"key":"70Z03826RB0000006","latest_notice_id":"3c3860d180bc4d73a877ebc06331be39","title":"Procurement for Spare Parts for the Pilot, Co-Pilot, and Mechanic Seats for the MH-65E Aircraft.","solicitation_number":"70Z03826RB0000006","notice_type":"k","first_type":"k","first_posted":"2026-02-06","last_posted":"2026-09-14","notices":10,"due_at":"2026-09-18T20:30:00Z","due_date":"2026-09-18","closes_at":"2026-09-18T20:30:00Z","awardable":true,"open":true,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"336413","psc":"1680","set_aside":null,"state":null,"county":null,"county_name":null,"city":null,"city_name":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T21:18:12.857524Z"},{"key":"70Z03826QJ0000359","latest_notice_id":"7aca059e2f4c44c7a52e57b8918008f8","title":"Resistor, VA, NONWI","solicitation_number":"70Z03826QJ0000359","notice_type":"k","first_type":"k","first_posted":"2026-08-31","last_posted":"2026-09-16","notices":4,"due_at":"2026-09-22T14:00:00Z","due_date":"2026-09-22","closes_at":"2026-09-22T14:00:00Z","awardable":true,"open":true,"dept_key":"d-070","dept_name":"HOMELAND SECURITY, DEPARTMENT OF","sub_key":"s-7008","sub_name":"US COAST GUARD","office_key":"o-70Z038","office_name":"AVIATION LOGISTICS CENTER (ALC)(00038)","naics":"336413","psc":"5905","set_aside":"SBA","state":null,"county":null,"county_name":null,"city":null,"city_name":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-17T06:28:38.602097Z"}]}