UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.
\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.
\n\n\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
","text":"UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.","origin":"detail"},"notice_type":{"code":"o","label":"Solicitation"},"schema_version":1,"solicitation_number":"47QACA26Q0393","product_service_code":"3441"},{"dates":{"posted":"2026-09-14","posted_at":"2026-09-14T16:54:32.604Z","created_at":"2026-09-14T16:53:13.412Z","modified_at":"2026-09-14T16:54:32.609Z","response_deadline":{"raw":"2026-09-17T14:00:00-04:00","utc":"2026-09-17T18:00:00Z","date":"2026-09-17","time":"14:00:00","timezone":"America/New_York","utc_offset_seconds":-14400}},"links":{"sam":"https://sam.gov/workspace/contract/opp/b6c1ca2dc444443a8543c66ba447840e/view"},"naics":{"codes":["333517"],"primary":"333517"},"title":"Flaring and Beading Machines - Amendment 0002","agency":{"office":{"code":"47QACA","name":"OFFICE OF CENTRALIZED ACQUISITION SERVICES"},"subtier":{"code":"4732","name":"FEDERAL ACQUISITION SERVICE"},"department":{"code":"047","name":"GENERAL SERVICES ADMINISTRATION"},"office_address":{"zip":"20405","city":"Washington","state":"DC","country":"USA"},"organization_id":"500194249","organization_type":"OFFICE"},"status":{"active":true,"latest":true,"deleted":false,"archived":false,"cancelled":false,"publication":"published","archive_date":"2026-10-02","archive_type":"auto15"},"history":[{"index":4,"title":"Flaring and Beading Machines - Amendment 0002","action":"publish","latest":true,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-09-14T16:54:32.604Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"b6c1ca2dc444443a8543c66ba447840e","solicitation_number":"47QACA26Q0393","parent_opportunity_id":"ccb93580547843adab7a9aa5ff2210bc"},{"index":3,"title":"Flaring and Beading Machines","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-09-14T16:52:58.614Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"a3a031366ff14742a414c88939a8e4e2","solicitation_number":"47QACA26Q0393","parent_opportunity_id":"ccb93580547843adab7a9aa5ff2210bc"},{"index":2,"title":"Flaring and Beading Machines","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-08-26T16:04:03.712Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"modify","opportunity_id":"f3afb529f3fb4f349b37b20cb7bbacd0","solicitation_number":"47QACA26Q0393","parent_opportunity_id":"ccb93580547843adab7a9aa5ff2210bc"},{"index":1,"title":"Flaring and Beading Machines","action":"publish","latest":false,"deleted":false,"archived":false,"cancelled":false,"posted_at":"2026-08-12T17:25:50.335Z","notice_type":{"code":"o","label":"Solicitation"},"request_type":"submit","opportunity_id":"ccb93580547843adab7a9aa5ff2210bc","solicitation_number":"47QACA26Q0393"}],"contacts":[{"name":"Melissa Martel","role":"primary","email":"melissa.martel@gsa.gov","phone":"202-258-0072"}],"base_type":{"code":"o","label":"Solicitation"},"notice_id":"b6c1ca2dc444443a8543c66ba447840e","set_aside":{"code":"SBA","label":"Total Small Business Set-Aside (FAR 19.5)"},"lineage_id":"ccb93580547843adab7a9aa5ff2210bc","provenance":{"detail":{"endpoints":["opportunity","resources","history"],"fetched_at":"2026-09-16T09:28:11.095684222Z"},"extract":{"url":"https://s3.amazonaws.com/falextracts/Contract%20Opportunities/datagov/ContractOpportunitiesFullCSV.csv","etag":"\"3f59209463433eba6899e195a597c64d-29\"","fetched_at":"2026-09-16T07:50:12.777658Z","row_sha256":"d016baed683028f3a17887ba38ce393a6a63f88af6b8ca040be0f43b7a6585f9","last_modified":"2026-09-16T03:30:52Z"},"updated_at":"2026-09-16T09:28:11.095684222Z","first_seen_at":"2026-09-15T22:52:52.472456Z"},"description":{"html":"UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.
\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.
\n\n\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
","text":"UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.","origin":"detail"},"notice_type":{"code":"o","label":"Solicitation"},"schema_version":1,"solicitation_number":"47QACA26Q0393","product_service_code":"3441"}],"due_at":"2026-09-17T18:00:00Z","due_date":"2026-09-17","closes_at":"2026-09-17T18:00:00Z","awardable":true,"dept_key":"d-047","dept_name":"GENERAL SERVICES ADMINISTRATION","sub_key":"s-4732","sub_name":"FEDERAL ACQUISITION SERVICE","office_key":"o-47QACA","office_name":"OFFICE OF CENTRALIZED ACQUISITION SERVICES","state":null,"country":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:31:38.954589Z","principal_notice_id":"b6c1ca2dc444443a8543c66ba447840e","description":{"text":"UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.","html":"UPDATE — Amendment 0002 / A0002: is issued to incorporate additional Government responses to vendor Requests for Information (RFIs) into the solicitation as Attachment 8 — Government Responses to RFIs, Round 2. Vendors shall consider the Government’s responses when preparing and submitting quotations. The quotation submission deadline is hereby extended. Quotations are due no later than 9/17/2026, at 2:00 Eastern Time. Except as amended herein, all other terms and conditions remain unchanged.
\n\nUPDATE — Amendment 0001 / A0001: The previously issued RFQ package is deleted in its entirety and replaced with revised/conformed RFQ package 47QACA26Q0393_R1. Vendors shall use the revised/conformed RFQ package and revised/added attachments when preparing quotations. Quotes are now due no later than September 3, 2026, at 2:00 PM Eastern Time. To the extent any information in the original notice description conflicts with Amendment 0001 or 47QACA26Q0393_R1, Amendment 0001 and 47QACA26Q0393_R1 control.
\n\n\n\nThis is a Request for Quote (RFQ) for a Firm-Fixed Price, supply contract for engine lathes, to the United States Air Force Life Cycle Material Command (AFLCMC). This requirement is for the supply of flaring and beading machines to ensure the AFLCMC can widen the end of pipes or tubes and to form raised edges or beads on tubes to strengthen various structures. (See Attachment 1 of RFQ for salient characteristics). This acquisition is being conducted under FAR Part 13 Simplified Acquisition Procedures, and FAR Part 12, Acquisition of Commercial Products and Commercial Services. All supplies submitted by proposed Contractors for consideration must be flaring and beading machines. The is a total small business set aside requirement.
","origin":"detail"},"contacts":[{"name":"Melissa Martel","role":"primary","email":"melissa.martel@gsa.gov","phone":"202-258-0072"}],"place_of_performance":null,"office_address":{"zip":"20405","city":"Washington","state":"DC","country":"USA"},"naics_codes":["333517"],"award":null,"attachments":[{"resource_id":"26788fde35314267ab563d2518e57f14","name":"47QACA26Q0393_RFQ_FlaringAndBeadingWithAllAttachments_2026-08-12.pdf","kind":"file","mime_type":".pdf","size_bytes":1589250,"posted_at":"2026-08-12T17:25:50.335Z","export_controlled":false,"sha256":null,"url":"https://sam.gov/api/prod/opps/v3/opportunities/resources/files/26788fde35314267ab563d2518e57f14/download","mirrored":false}],"awards":[],"related":[{"key":"47QACA26Q0394","latest_notice_id":"bfb03bc8766044cbb3c03205e1355330","title":"CNC Abrasive Waterjet - Amendment 0002","solicitation_number":"47QACA26Q0394","notice_type":"k","first_type":"k","first_posted":"2026-08-18","last_posted":"2026-09-15","notices":3,"due_at":"2026-09-17T18:00:00Z","due_date":"2026-09-17","closes_at":"2026-09-17T18:00:00Z","awardable":true,"open":true,"dept_key":"d-047","dept_name":"GENERAL SERVICES ADMINISTRATION","sub_key":"s-4732","sub_name":"FEDERAL ACQUISITION SERVICE","office_key":"o-47QACA","office_name":"OFFICE OF CENTRALIZED ACQUISITION SERVICES","naics":"333517","psc":"3449","set_aside":null,"state":null,"country":null,"winner":null,"winner_key":null,"amount":null,"linked_awards":0,"cancelled":false,"archived":false,"updated_at":"2026-09-16T07:50:43.959643Z"}]}