# Maintenance and Repair Hurst eDraulic tools and Eagle Breath Compressor

Canonical: https://abierto.us/opportunities/011724

- Solicitation number: 011724
- Notice type: Sources sought
- Status: Closed. Deadline was January 28, 2024 at 8:00 PM EST
- Department: Department of the Navy
- Agency: Department of the Navy
- Contracting office: NAVSUP FLC Yokosuka Sasebo Office (N68246)
- NAICS: 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Product or service code: J012 Maintenance, Repair and Rebuilding of Equipment: Fire Control Equipment
- Place of performance: Santa Rita, Guam
- County: Guam (FIPS 66010). https://abierto.us/counties/guam-gu-66010
- First posted: January 16, 2024
- Last posted: January 16, 2024
- SAM.gov: https://sam.gov/workspace/contract/opp/7a7a53aa62ba4af2a304cfed4643d36e/view

## Description

For Market Research Only.

**Scope:** This order provides for maintenance and repair service of Eagle Air compressor and HURST Hurst eDraulic tools equipment. The following request represents the minimum requirements of the Joint Region Marianas Fire and Emergency Services.

**Description:** Provide Routine annual service for Eagle breathing air compressor.

**MN:**

**B4A15M3D5U SN:**

**25618301 Includes:**

- Routine maintenance parts - Purification cartridge - Air filter - Oil - Air Sample Scope of work compressor service 1. Inspect oil level/pressure 2. Inspect air pressure gauges 3. Calibrate CO Monitor/moisture Indicator 4. Change purification filters 5. Change O-rings 6. Service Auto-drain 7. Lubricate motor/engine 8. Inspect on-off button/emergency stop 9. Inspect fill whips 10. Inspect muffler, reservoir and drain 11. Inspect regulators 12. Inspect doors, panels, and frame 13. Inspect piping fittings and monitor for air leaks 14. Insure head bolts at proper torque 15. Inspect and clean cooling fans 16. Service Final Separator 17. Clean compressor 18. Air sample (optional, but recommended) 19. Inspect compressor and fill system for air leaks 20. Inspect and replace air/intake filter 21. Inspect and clean compressor coolers 22. Inspect drive belts 23. Check and record inter-stage pressure readings Perform routine annual service on Hurst eDraulic tools.

17 units -Replace eDraulic fluid on all Hurst tools -Provide the following part to be used for repair. -4 EA 272085888S HURST S700 2.0 Blade and Plate Kit OEM -1 EA 172080119S HURST Pivot Bolt OEM -2 EA 172085108S HURST S700 2.0 Guards - Plugs and Hardware OEM -1 EA 172085110S HURST S700 2.0 Handle Kit OEM -1 EA 172090016S HURST Handle for Edraulic Combi-Tool OEM -2 EA 172080366S HURST Gen 1 Edraulic Shuttle Valve OEM -8 EA 172085324S HURST Check Valve Set for E2 Series Tools Scope of Work - Hurst eDraulic tools Spreader / Cutter / Combi-tool a. Visual inspection of tool b. Inspect arms/tips/blades for wear & damage c. Inspect shaft seal & piston rod d. Inspect control valve e. Operate tool and observe speeds f. Remove pivot pins, link arms and blades; clean & lube g. Replace decals as required h. Torque main bolt to spec Rams a. Visual inspection of tool b. Operate tool and observe speeds c. Inspect shaft seal and piston d. Check lights for proper operation e. Replace decals as required f. Inspect ram extension kit Accessories Batteries, Chargers, Adapters a. Inspect case for cracking b. Check lights for proper operation Period of Performance of Service: To be determined upon award of contract Service Location: Joint Region Marianas Fire & Emergency Services

## Publications

- January 16, 2024: Sources sought, due January 28, 2024 at 8:00 PM EST. Notice 7a7a53aa62ba4af2a304cfed4643d36e. https://sam.gov/workspace/contract/opp/7a7a53aa62ba4af2a304cfed4643d36e/view

## Points of contact

- Pamela Gusta, pamela.s.gusta.civ@us.navy.mil, 671-339-3256

---
Source: SAM.gov Contract Opportunities bulk extract. Confirm deadlines on SAM.gov before responding. Cite https://abierto.us/opportunities/011724.